EUVIMEDEUVIMED entdecken
Crossref

Response Surface Method Optimization of Hard Machining with Cryogenically Treated Cutting Tools: Surface Roughness, Cutting Force, Tool Wear, Rietveld Analysis, and Metallurgical Properties

Fuat Kara, Aysun Takmaz, Ömer Erkan, Serhat Filiz

steel research international · 2025-07 · 96 (7)

DOI: 10.1002/srin.202400850 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 27.12.2024. Verfasst von Fuat Kara und 3 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study consists of two stages: machinability tests and metallographic examinations. In the first stage of the study, response surface methodology (RSM) optimization was performed for the main‐cutting‐force (Fc) and average surface roughness (Ra) values obtained as a result of turning tests. In the second stage, the wear performance of cutting tool tips with and without deep cryogenic treatment was explained with the support of SEM images, EDX, XRD, and microhardness analyses. As a result of ANOVA analysis, it was found that the most effective parameter on Fc was the feed rate, with 78.89%. As a result of RSM‐optimization, the lowest Fc value was found to be 339.99 N. The most effective parameter on Ra was found to be the feed rate at 69.38%. In terms of tool life, 15% and 11% improvements were achieved in uncoated and coated carbide cutting tools, respectively. As a result of Rieltveld's analysis, it was determined that cryogenic treatment increased the carbide percentages in the tools. As a result of microhardness measurements, it was observed that the hardness of uncoated and coated carbide tools increased by 4.6% and 5.15%, respectively, after cryogenic treatment.

Zitieren

APA

Kara, F., Takmaz, A., Erkan, Ö., & Filiz, S. (2025). Response Surface Method Optimization of Hard Machining with Cryogenically Treated Cutting Tools: Surface Roughness, Cutting Force, Tool Wear, Rietveld Analysis, and Metallurgical Properties. steel research international, 96(7). https://doi.org/10.1002/srin.202400850

Vancouver

Kara F, Takmaz A, Erkan Ö, Filiz S. Response Surface Method Optimization of Hard Machining with Cryogenically Treated Cutting Tools: Surface Roughness, Cutting Force, Tool Wear, Rietveld Analysis, and Metallurgical Properties. steel research international. 2025;96(7). doi:10.1002/srin.202400850

BibTeX
@article{Kara2025,
  author = {Kara, Fuat and Takmaz, Aysun and Erkan, Ömer and Filiz, Serhat},
  title = {Response Surface Method Optimization of Hard Machining with Cryogenically Treated Cutting Tools: Surface Roughness, Cutting Force, Tool Wear, Rietveld Analysis, and Metallurgical Properties},
  journal = {steel research international},
  year = {2025},
  volume = {96},
  number = {7},
  doi = {10.1002/srin.202400850}
}
Kostenlos starten →