EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Aanalytical Modeling of Cutting Tool Wear for Superalloy and Experimental Validation

Lixin Wang, Binglin Li

Scientific Journal of Technology · 19.03.2025 · 7 (3) · 90-99

DOI: 10.54691/bwp7xc95 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientific Journal of Technology, online erschienen am 19.03.2025. Verfasst von Lixin Wang und 1 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tool life in superalloy cutting is an important parameter that affects the machining cost and efficiency. In this paper, the wear analysis model of superalloy GH901 cutting tool is established by using minimum energy method. The influence of chip velocity, cutting temperature and positive pressure on the wear are considered. Aiming at three different types of cutting tools, the cutting speed of 40m/min is used to carry out the turning wear experiment on superalloy GH901. The tool life curve is established according to the measurement data of the wear width of the back tool face. The analysis and comparison with the literature model prediction and the experimental results show that the proposed model has a good prediction effect on the wear measurement of superalloy tool. Furthermore, the influence of cutting speed and thermodynamic parameters between tool and workpiece on tool wear are analyzed theoretically.

Zitieren

APA

Wang, L., & Li, B. (2025). Aanalytical Modeling of Cutting Tool Wear for Superalloy and Experimental Validation. Scientific Journal of Technology, 7(3), 90-99. https://doi.org/10.54691/bwp7xc95

Vancouver

Wang L, Li B. Aanalytical Modeling of Cutting Tool Wear for Superalloy and Experimental Validation. Scientific Journal of Technology. 2025;7(3):90-99. doi:10.54691/bwp7xc95

BibTeX
@article{Wang2025,
  author = {Wang, Lixin and Li, Binglin},
  title = {Aanalytical Modeling of Cutting Tool Wear for Superalloy and Experimental Validation},
  journal = {Scientific Journal of Technology},
  year = {2025},
  volume = {7},
  number = {3},
  pages = {90--99},
  doi = {10.54691/bwp7xc95}
}
Kostenlos starten →