EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Tool Wear Rate and Tool Wear during Dry Orthogonal Cutting of Inconel 718

Ziqi Zhang, Zhanqiang Liu, Xiaoping Ren, Jinfu Zhao

Metals · 03.07.2023 · 13 (7) · 1225

DOI: 10.3390/met13071225 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 03.07.2023. Verfasst von Ziqi Zhang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shandong Provincial Key Research and Development Program (Major Scientific and Technological Innovation Project), Taishan Scholar Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A new prediction method was proposed based on the positive feedback relationship between tool geometry and tool wear rate. Dry orthogonal cutting of Inconel 718 was used as a case study. Firstly, tool wear rate models and a tool wear prediction flowchart were proposed. Secondly, the evolution of the tool geometry during tool wear was analyzed considering the combined effect of tool crater wear and tool flank wear. Thirdly, the evolution of the cutting temperature, normal stress and tool–chip relative sliding velocity on the tool wear surface was studied, the evolution of the tool wear rate during tool wear was revealed. Finally, the evolution of the tool geometry and tool wear rate during tool wear were applied to the tool wear prediction method to accurately predict the tool wear. The prediction error of KT is less than 15% in comparison with the experimental results. The tool wear prediction method in this paper is helpful to improve the prediction accuracy of tool crater wear.

Förderung

  • National Natural Science Foundation of China
  • Shandong Provincial Key Research and Development Program (Major Scientific and Technological Innovation Project)
  • Taishan Scholar Foundation

Zitieren

APA

Zhang, Z., Liu, Z., Ren, X., & Zhao, J. (2023). Prediction of Tool Wear Rate and Tool Wear during Dry Orthogonal Cutting of Inconel 718. Metals, 13(7), 1225. https://doi.org/10.3390/met13071225

Vancouver

Zhang Z, Liu Z, Ren X, Zhao J. Prediction of Tool Wear Rate and Tool Wear during Dry Orthogonal Cutting of Inconel 718. Metals. 2023;13(7):1225. doi:10.3390/met13071225

BibTeX
@article{Zhang2023,
  author = {Zhang, Ziqi and Liu, Zhanqiang and Ren, Xiaoping and Zhao, Jinfu},
  title = {Prediction of Tool Wear Rate and Tool Wear during Dry Orthogonal Cutting of Inconel 718},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {7},
  pages = {1225},
  doi = {10.3390/met13071225}
}
Kostenlos starten →