EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Experimental Validation of a Thin-Film Thermocouple System for Real-Time Temperature Monitoring and Tool Wear Prediction in Cutting Processes

Yingyuan Luo, Qi Xu, Lei Zhu, Xueliang Zhang

Crystals · 07.05.2026 · 16 (5) · 312

DOI: 10.3390/cryst16050312 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 07.05.2026. Verfasst von Yingyuan Luo und 3 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A homemade NiCr/NiSi thin-film thermocouple integrated with a PCBN turning tool was developed for real-time temperature monitoring during dry turning of AISI 1045 steel. The study addresses a practical limitation of existing cutting-temperature methods, namely the difficulty of combining local in situ sensing near the cutting edge with a transient thermal analysis framework that can interpret the measured signal under repeatable cutting conditions. The sensor was fabricated on an Al2O3 substrate by magnetron sputtering, protected by a SiO2 layer, and tested at cutting speeds corresponding to spindle speeds of 1000, 1500 and 2000 rpm, with a cutting depth of 0.5 mm, a feed rate of 0.1 mm/rev and cutting times of 30–90 s. A three-dimensional transient heat-conduction model and inverse heat-flux reconstruction were then used to interpret the temperature history. The maximum measured temperature increased from 342 °C to 488 °C, and VB increased from 0.082 mm to 0.295 mm, showing a strong temperature–wear association within the investigated parameter window.

Zitieren

APA

Luo, Y., Xu, Q., Zhu, L., & Zhang, X. (2026). Development and Experimental Validation of a Thin-Film Thermocouple System for Real-Time Temperature Monitoring and Tool Wear Prediction in Cutting Processes. Crystals, 16(5), 312. https://doi.org/10.3390/cryst16050312

Vancouver

Luo Y, Xu Q, Zhu L, Zhang X. Development and Experimental Validation of a Thin-Film Thermocouple System for Real-Time Temperature Monitoring and Tool Wear Prediction in Cutting Processes. Crystals. 2026;16(5):312. doi:10.3390/cryst16050312

BibTeX
@article{Luo2026,
  author = {Luo, Yingyuan and Xu, Qi and Zhu, Lei and Zhang, Xueliang},
  title = {Development and Experimental Validation of a Thin-Film Thermocouple System for Real-Time Temperature Monitoring and Tool Wear Prediction in Cutting Processes},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {312},
  doi = {10.3390/cryst16050312}
}
Kostenlos starten →