EUVIMEDEUVIMED entdecken
Crossref

Design and Fabrication of Vacuum-Assisted Compression Mould for Thermoplastic Polymers with Experimental Validation

Said A. Al Mufarraji, Farooq Al Jahwari, Mahmoud Al-Kindi, Tasneem Pervez, Imad Murtadha Ali

The Journal of Engineering Research · 22.09.2025 · 22 (1) · 1-9

DOI: 10.53540/1726-6742.1305 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Engineering Research, online erschienen am 22.09.2025. Verfasst von Said A. Al Mufarraji und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The manufacturing of thermoplastic materials, particularly polypropylene, is crucial for various industrial applications due to their lightweight, versatile, and durable properties. Compression moulding is a favored method for producing high-strength components; however, traditional open mould systems often result in defects such as air bubbles and voids, which weaken the mechanical integrity of the final product. This research introduces an advanced vacuum-assisted closed mould system designed to enhance the compressive strength and overall mechanical performance of polypropylene specimens. By applying vacuum, entrapped air is effectively removed, ensuring uniform material flow and reducing defects. Experimental results show a substantial improvement in mechanical properties: stress at 0.4 strain increased from 34.98 mpa in conventional compression moulding to 47.2 mpa with vacuum assistance, reflecting a 34.93% increase. Young’s modulus increased from 432.61 mpa to 620.46 mpa, representing a 43.42% enhancement in stiffness. These improvements demonstrate that vacuum-assisted moulding not only enhances material properties but also promotes more efficient manufacturing by minimizing waste and reducing post-moulding machining. this advancement highlights the potential of vacuum-assisted systems to meet growing industrial demands for high-performance, mechanically robust thermoplastic components.

Zitieren

APA

Mufarraji, S. A. A., Jahwari, F. A., Al-Kindi, M., Pervez, T., & Ali, I. M. (2025). Design and Fabrication of Vacuum-Assisted Compression Mould for Thermoplastic Polymers with Experimental Validation. The Journal of Engineering Research, 22(1), 1-9. https://doi.org/10.53540/1726-6742.1305

Vancouver

Mufarraji SAA, Jahwari FA, Al-Kindi M, Pervez T, Ali IM. Design and Fabrication of Vacuum-Assisted Compression Mould for Thermoplastic Polymers with Experimental Validation. The Journal of Engineering Research. 2025;22(1):1-9. doi:10.53540/1726-6742.1305

BibTeX
@article{Mufarraji2025,
  author = {Mufarraji, Said A. Al and Jahwari, Farooq Al and Al-Kindi, Mahmoud and Pervez, Tasneem and Ali, Imad Murtadha},
  title = {Design and Fabrication of Vacuum-Assisted Compression Mould for Thermoplastic Polymers with Experimental Validation},
  journal = {The Journal of Engineering Research},
  year = {2025},
  volume = {22},
  number = {1},
  pages = {1--9},
  doi = {10.53540/1726-6742.1305}
}
Kostenlos starten →