EUVIMEDEUVIMED entdecken
Crossref

Investigating the Effect of Energy Density on Corrosion Susceptibility of Additively Manufactured Thin-walled Cobalt Chrome Alloy

L. O. Osoba, A. M. Oladoye, C. O. Folorunsho, Y. O. Abiodun, B. O. Alenkhe

Journal of Engineering Research · 2024

DOI: 10.52968/72013265 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Research, 2024. Verfasst von L. O. Osoba und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal additive manufacturing is an innovative technology based on fabricating near-net shaped metallic components from a digital model in a layer-by-layer manner. Although, it has many advantages over conventional subtractive methods, understanding the correlation between process parameters and properties of additively manufactured alloys is key to producing components with optimal performance. Hence, in this study corrosion susceptibility of laser powder bed fusion additively manufactured cobalt chromium alloy (CoCr) alloy produced with three different energy densities (0.58 J/m, 0.87 J/m, 2.26 J/m) was investigated. Some of the CoCr alloys produced were subjected to post-build heat treatment by hot isostatic pressing (HIP). Corrosion resistance of both as-built and HIP CoCr alloys in 0.5 M H2SO4solution at room temperature was investigated using gravimetric method. The results indicated that additively manufactured (AM) CoCr alloy produced with energy density of 0.58 J/m and 2.26 J/m respectively were less susceptible to corrosion compared to that produced with energy density of 0.87 J/m which is the standard energy density recommended by the Original Equipment Manufacturer (OEM). This result was consistent with the trend observed in previously reported mechanical properties of the AM CoCr alloys.

Zitieren

APA

Osoba, L. O., Oladoye, A. M., Folorunsho, C. O., Abiodun, Y. O., & Alenkhe, B. O. (2024). Investigating the Effect of Energy Density on Corrosion Susceptibility of Additively Manufactured Thin-walled Cobalt Chrome Alloy. Journal of Engineering Research. https://doi.org/10.52968/72013265

Vancouver

Osoba LO, Oladoye AM, Folorunsho CO, Abiodun YO, Alenkhe BO. Investigating the Effect of Energy Density on Corrosion Susceptibility of Additively Manufactured Thin-walled Cobalt Chrome Alloy. Journal of Engineering Research. 2024. doi:10.52968/72013265

BibTeX
@article{Osoba2024,
  author = {Osoba, L. O. and Oladoye, A. M. and Folorunsho, C. O. and Abiodun, Y. O. and Alenkhe, B. O.},
  title = {Investigating the Effect of Energy Density on Corrosion Susceptibility of Additively Manufactured Thin-walled Cobalt Chrome Alloy},
  journal = {Journal of Engineering Research},
  year = {2024},
  doi = {10.52968/72013265}
}
Kostenlos starten →