EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion of an Additively Manufactured Ti6Al4V Alloy in Saline and Acidic Media

Hugo Mora-Sanchez iD, Miguel Collado-Vian, Marta Mohedano iD, Raúl Arrabal iD, Endzhe Matykina iD

Materials · 02.02.2024 · 17 (3) · 712

DOI: 10.3390/ma17030712 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.02.2024. Verfasst von Hugo Mora-Sanchez und 4 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería Química y de Materiales, Facultad de Ciencias Químicas, Universidad Complutense de Madrid, 28040 Madrid, Spain. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Regional goverment of Madrid and EU structural funds, Ministerio de ciencias y universidades de España, MCIU/AEI/FEDER, UE.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present work aims to provide corrosion performance data for an additively manufactured Ti6Al4V alloy in saline and polluted environments. The as-received additively manufactured material underwent heat treatment at 850 °C for 3 h to transform the acicular α’ microstructure into a lamellar α microstructure. Comparative corrosion assessments were conducted between the heat-treated substrates, the as-received condition, and a conventionally mill-annealed alloy. Potentiodynamic polarization experiments were carried out in saline (3.5 wt.% NaCl) and acid aqueous media ((NH4)2SO4 containing Harrison’s solution). The corrosion performance of additively manufactured substrates matched or surpassed that of the conventional alloy in Harrison’s solutions while remaining inferior in saline medium, despite forming a thicker passive film. Overall, the XY plane showed better corrosion performance, particularly after the elimination of the acicular α’ martensite by the applied heat treatment. The results also suggested that the presence of the coarse β phase was beneficial in 3.5 wt.% NaCl solution and detrimental in Harrison’s solutions, more so in acidified and fluorinated conditions.

Schlagwörter

Stichwörter der Autor:innen

acid rainadditive manufacturingcorrosionheat treatmentpassive layerseawaterselective laser meltingtitanium

Autor:innen und Institutionen

  • Departamento de Ingeniería Química y de Materiales, Facultad de Ciencias Químicas, Universidad Complutense de Madrid, 28040 Madrid, Spain.
  • CIDETEC, Basque Research and Technology Alliance (BRTA), Po. Miramón 196, 20014 Donostia-San Sebastián, Spain.

ORCID-Profile: Hugo Mora-Sanchez, Marta Mohedano, Raúl Arrabal, Endzhe Matykina

Förderung

  • Regional goverment of Madrid and EU structural funds
  • Ministerio de ciencias y universidades de España
  • MCIU/AEI/FEDER, UE
  • Regional Government of Madrid and EU Structural Funds
  • RYC 2017-21843
  • UCM

Zitieren

APA

Mora-Sanchez, H., Collado-Vian, M., Mohedano, M., Arrabal, R., & Matykina, E. (2024). Corrosion of an Additively Manufactured Ti6Al4V Alloy in Saline and Acidic Media. Materials, 17(3), 712. https://doi.org/10.3390/ma17030712

Vancouver

Mora-Sanchez H, Collado-Vian M, Mohedano M, Arrabal R, Matykina E. Corrosion of an Additively Manufactured Ti6Al4V Alloy in Saline and Acidic Media. Materials. 2024;17(3):712. doi:10.3390/ma17030712

BibTeX
@article{MoraSanchez2024,
  author = {Mora-Sanchez, Hugo and Collado-Vian, Miguel and Mohedano, Marta and Arrabal, Raúl and Matykina, Endzhe},
  title = {Corrosion of an Additively Manufactured Ti6Al4V Alloy in Saline and Acidic Media},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {3},
  pages = {712},
  doi = {10.3390/ma17030712}
}
Kostenlos starten →