EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion Behavior of Additively Manufactured GRX-810 Alloy in 3.5 wt.% NaCl

Peter Omoniyi iD, Samuel Alfred iD, Kenneth Looby, Olu Bamiduro, Mehdi Amiri iD, Gbadebo Owolabi

Materials · 10.07.2025 · 18 (14) · 3252

DOI: 10.3390/ma18143252 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.07.2025. Verfasst von Peter Omoniyi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Howard University, Washington, DC 20059, USA. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Aeronautics & Space Administration (NASA) through 19-ULI Step-B-0009 - Leading Advanced Turbine Research for Hybrid Electric Propulsion Systems, NASA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the corrosion characteristics of GRX-810, a NiCoCr-based high entropy alloy, in a simulated marine environment represented by 3.5 wt.% NaCl solution. The research employs electrochemical and surface analysis techniques to evaluate the corrosion performance and protective mechanisms of this alloy. Electrochemical characterization was performed using potentiodynamic polarization to determine critical corrosion parameters, including corrosion potential and current density, along with electrochemical impedance spectroscopy to assess the stability and protective qualities of the oxide film. Surface analytical techniques provided detailed microstructural and compositional insights, with scanning electron microscopy revealing the morphology of corrosion products, energy-dispersive X-ray spectroscopy identifying elemental distribution in the passive layer, and X-ray diffraction confirming the chemical composition and crystalline structure of surface oxide. The results demonstrated distinct corrosion resistance behavior between the different processing conditions of the alloy. The laser powder bed fused (LPBF) specimens in the as-built condition exhibited superior corrosion resistance compared to their hot isostatically pressed (HIPed) counterparts, as evidenced by higher corrosion potentials and lower current densities. Microscopic examination revealed the formation of a dense, continuous layer of corrosion products on the alloy surface, indicating effective barrier protection against chloride ion penetration. A compositional analysis of all samples identified oxide film enriched with chromium, nickel, cobalt, aluminum, titanium, and silicon. XRD characterization confirmed the presence of chromium oxide (Cr2O3) as the primary protective phase, with additional oxides contributing to the stability of the film. This oxide mixture demonstrated the alloy’s ability to maintain passivity and effective repassivation following film breakdown.

Schlagwörter

Stichwörter der Autor:innen

GRX 810HIPcorrosionhigh entropy alloymicrostructureoxide film

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Howard University, Washington, DC 20059, USA.
  • Department of Mechanical Engineering, George Mason University, Fairfax, VA 22030, USA.
  • Department of Mechanical Engineering Technology, Hagerstown Community College, Hagerstown, MD 21742, USA.

ORCID-Profile: Peter Omoniyi, Samuel Alfred, Mehdi Amiri

Förderung

  • National Aeronautics & Space Administration (NASA) through 19-ULI Step-B-0009 - Leading Advanced Turbine Research for Hybrid Electric Propulsion Systems
  • NASA

Zitieren

APA

Omoniyi, P., Alfred, S., Looby, K., Bamiduro, O., Amiri, M., & Owolabi, G. (2025). Corrosion Behavior of Additively Manufactured GRX-810 Alloy in 3.5 wt.% NaCl. Materials, 18(14), 3252. https://doi.org/10.3390/ma18143252

Vancouver

Omoniyi P, Alfred S, Looby K, Bamiduro O, Amiri M, Owolabi G. Corrosion Behavior of Additively Manufactured GRX-810 Alloy in 3.5 wt.% NaCl. Materials. 2025;18(14):3252. doi:10.3390/ma18143252

BibTeX
@article{Omoniyi2025,
  author = {Omoniyi, Peter and Alfred, Samuel and Looby, Kenneth and Bamiduro, Olu and Amiri, Mehdi and Owolabi, Gbadebo},
  title = {Corrosion Behavior of Additively Manufactured GRX-810 Alloy in 3.5 wt.% NaCl},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {14},
  pages = {3252},
  doi = {10.3390/ma18143252}
}
Kostenlos starten →