Comparative biomechanical evaluation of medial support plating in Pauwels type III femoral neck fractures: A finite element analysis
Joint Diseases and Related Surgery · 01.09.2026 · 37 (3) · 677-687
DOI: 10.52312/jdrs.2026.2806 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift Joint Diseases and Related Surgery, online erschienen am 24.04.2026. Verfasst von Mahmut Kalem und 4 weiteren Autor:innen. Beteiligte Einrichtung: Ankara Üniversitesi Tıp Fakültesi, Ortopedi ve Travmatoloji Anabilim Dalı, İbn-i Sina Hastanesi, 06230 Altındağ, Ankara, Türkiye. drkalem@hotmail.com. Hauptthemen laut MEDLINE: Bone Plates, Fracture Fixation, Internal, Femoral Neck Fractures. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
OBJECTIVES: This study aims to evaluate the biomechanical contribution of medial support plating compared to isolated screws and to determine the impact of plate design (one-third tubular vs. mini-plate) and distal screw configuration (unicortical vs. bicortical) on construct stability. MATERIALS AND METHODS: Five finite element models were analyzed in this study: three cannulated screws (CS) alone (control), and CS augmented with either a one-third tubular plate or a 2.4-mm mini-plate. For the plated models, the distal fragment was fixed using either unicortical or bicortical screws to isolate the effect of cortical purchase. A 1,400 N axial load was applied to simulate the single-leg stance phase of gait. Fracture micromotion, femoral head displacement, and von Mises stress distribution were recorded. RESULTS: Medial support plating substantially improved construct stability compared to screws alone, reducing femoral head displacement and fracture gap movement. Notably, no significant biomechanical differences were observed between unicortical and bicortical fixation configurations for either plate type. Both the one-third tubular plate and the 2.4-mm mini-plate provided equivalent rigidity. Although mini-plates exhibited higher internal stress concentrations, values remained below the yield strength of the material. CONCLUSION: Bicortical fixation provided no additional mechanical advantage over unicortical fixation in improving construct stability or reducing implant stress. Therefore, the primary determinant of stability is the medial buttress effect itself; once this is established, neither the plate profile nor the screw length significantly alters the biomechanical outcome, suggesting that unicortical fixation with low-profile plates provides sufficient mechanical stability.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Ankara Üniversitesi Tıp Fakültesi, Ortopedi ve Travmatoloji Anabilim Dalı, İbn-i Sina Hastanesi, 06230 Altındağ, Ankara, Türkiye. drkalem@hotmail.com.
Zitieren
APA
Kalem, M., Kısmet, M., Ertan, M. B., Şahin, E., & Kocaoğlu, H. (2026). Comparative biomechanical evaluation of medial support plating in Pauwels type III femoral neck fractures: A finite element analysis. Joint Diseases and Related Surgery, 37(3), 677-687. https://doi.org/10.52312/jdrs.2026.2806
Vancouver
Kalem M, Kısmet M, Ertan MB, Şahin E, Kocaoğlu H. Comparative biomechanical evaluation of medial support plating in Pauwels type III femoral neck fractures: A finite element analysis. Joint Diseases and Related Surgery. 2026;37(3):677-687. doi:10.52312/jdrs.2026.2806
BibTeX
@article{Kalem2026,
author = {Kalem, Mahmut and Kısmet, Malik and Ertan, Mehmet Batu and Şahin, Ercan and Kocaoğlu, Hakan},
title = {Comparative biomechanical evaluation of medial support plating in Pauwels type III femoral neck fractures: A finite element analysis},
journal = {Joint Diseases and Related Surgery},
year = {2026},
volume = {37},
number = {3},
pages = {677--687},
doi = {10.52312/jdrs.2026.2806}
}
EUVIMED