EUVIMEDEUVIMED entdecken
Crossref

Influence of the layer thickness on the flexural strength of aged and non-aged additively manufactured interim dental material.

Michael D. Scherer, Nadin Al‐Haj Husain, Abdul Basir Barmak, John C. Kois, Özcan, Mutlu, Marta Revilla‐León

Open Access CRIS of the University of Bern · 01.04.2023

DOI: 10.48350/171762 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Open Access CRIS of the University of Bern, erschienen am 01.04.2023. Verfasst von Michael D. Scherer und 6 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE To measure the flexural strength and Weibull characteristics of aged and non-aged printed interim dental material fabricated with different layer thickness. MATERIAL AND METHODS Bars (25×2×2 mm) were additively fabricated by using a polymer printer (Asiga Max) and an interim resin (Nexdent C&B MFH). Specimens were fabricated with the same printing parameters and postprocessing procedures, but with 7 different layer thickness: 50 (control or 50-G group), 10 (10-G group), 25 (25-G group), 75 (75-G group), 100 (100-G group), 125 (125-G group), and 150 μm (150-G group). Two subgroups were created: non-aged and aged subgroups (n = 10). A universal testing machine was selected to measure flexural strength. Two-parameter Weibull distribution values were computed. Two-way ANOVA and Tukey tests were elected to examine the data (α = .05). RESULTS Artificial aging methods (P

Schlagwörter

flexural strengthlayer thicknessadditive manufacturingdental resinartificial agingWeibull distribution

Zitieren

APA

Scherer, M. D., Husain, N. A., Barmak, A. B., Kois, J. C., Özcan, Mutlu, & Revilla‐León, M. (2023). Influence of the layer thickness on the flexural strength of aged and non-aged additively manufactured interim dental material. Open Access CRIS of the University of Bern. https://doi.org/10.48350/171762

Vancouver

Scherer MD, Husain NA, Barmak AB, Kois JC, Özcan, Mutlu, et al. Influence of the layer thickness on the flexural strength of aged and non-aged additively manufactured interim dental material. Open Access CRIS of the University of Bern. 2023. doi:10.48350/171762

BibTeX
@article{Scherer2023,
  author = {Scherer, Michael D. and Husain, Nadin Al‐Haj and Barmak, Abdul Basir and Kois, John C. and Özcan and Mutlu and Revilla‐León, Marta},
  title = {Influence of the layer thickness on the flexural strength of aged and non-aged additively manufactured interim dental material},
  journal = {Open Access CRIS of the University of Bern},
  year = {2023},
  doi = {10.48350/171762}
}
Kostenlos starten →