Effect of layer thickness on the integrity of additively manufactured interim crowns: a systematic review and meta-analysis
Odontology · 11.03.2026
DOI: 10.1007/s10266-026-01360-0 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Odontology, online erschienen am 11.03.2026. Verfasst von Pedro Thiago de Oliveira Neves und 5 weiteren Autor:innen. Beteiligte Einrichtung: Universidade de Pernambuco, Recife, Brazil. pethiagoo@gmail.com. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade De Pernambuco.
Abstract (Originalsprache)
Printing parameters such as layer thickness can influence the integrity of printed interim crowns and their clinical performance. Adjustments to the thickness of each printed layer can influence the mechanical strength and attributes such as aesthetics, marginal adaptation, and surface quality, ultimately impacting the durability of interim crowns. This systematic review aimed to compare the 50 μm layer thickness with other protocols and evaluate the effect of layer thickness on the physical and mechanical properties for additively manufactured interim crowns. Two researchers independently searched for relevant studies published from August 2019 to September 2025 using electronic databases (PubMed/MEDLINE, Scopus, Web of Science and LILACS). The PICO question was, “Does a layer thickness of 50 μm promote better physical properties for 3D printed interim crowns when compared to other thicknesses?” Studies that compared the properties of different printing layer thickness were included. Sixteen in-vitro studies were selected for qualitative analysis. Regarding flexural strength, marginal and internal fit and hardness, the meta-analysis indicated difference, with better results for the 50 μm layer thickness (flexural strength, p = 0,001; marginal fit, p < 0,00001; hardness, p = 0,05). When evaluating surface roughness and trueness the 25 μm, 20 μm and 50 μm thicknesses had similar performances. Compared to other thicknesses, the 50 μm layer presented better results for flexural strength, hardness and marginal and internal fit. When analyzing surface roughness and trueness, layers thinner than 50 μm yielded similarly satisfactory results.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Universidade de Pernambuco, Recife, Brazil. pethiagoo@gmail.com.
- Universidade de Pernambuco, Recife, Brazil.
- Universidade Estadual Paulista, Araçatuba, Brazil.
Förderung
- Universidade De Pernambuco
Zitieren
APA
de Oliveira Neves, P. T., Lins, L. B. C., Acioli, A. C. R., da Silva Casado, B. G., de Luna Gomes, J. M., & de Souza Leão, R. (2026). Effect of layer thickness on the integrity of additively manufactured interim crowns: a systematic review and meta-analysis. Odontology. https://doi.org/10.1007/s10266-026-01360-0
Vancouver
de Oliveira Neves PT, Lins LBC, Acioli ACR, da Silva Casado BG, de Luna Gomes JM, de Souza Leão R. Effect of layer thickness on the integrity of additively manufactured interim crowns: a systematic review and meta-analysis. Odontology. 2026. doi:10.1007/s10266-026-01360-0
BibTeX
@article{deOliveiraNeves2026,
author = {de Oliveira Neves, Pedro Thiago and Lins, Laura Buarque Caminha and Acioli, Anny Caroline Rodrigues and da Silva Casado, Bruno Gustavo and de Luna Gomes, Jéssica Marcela and de Souza Leão, Rafaella},
title = {Effect of layer thickness on the integrity of additively manufactured interim crowns: a systematic review and meta-analysis},
journal = {Odontology},
year = {2026},
doi = {10.1007/s10266-026-01360-0}
}
EUVIMED