EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Artificial Neural Network Performance Modeling and Evaluation of Additive Manufacturing 3D Printed Parts

Sivarao Subramonian, Kumaran Kadirgama, Abdulkareem Sh. Mahdi Al-Obaidi, Mohd Shukor Mohd Salleh, Umesh Kumar Vatesh, Satish Pujari, Dharsyanth Rao, Devarajan Ramasamy

Engineering, Technology & Applied Science Research · 13.10.2023 · 13 (5) · 11677-11684

DOI: 10.48084/etasr.6185 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 13.10.2023. Verfasst von Sivarao Subramonian und 7 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research article presents a comprehensive study on the performance modeling of 3D printed parts using Artificial Neural Networks (ANNs). The aim of this study is to optimize the mechanical properties of 3D printed components through accurate prediction and analysis. The study focuses on the widely employed Fused Deposition Modeling (FDM) technique. The ANN model is trained and validated using experimental data, incorporating input parameters such as temperature, speed, infill direction, and layer thickness to predict mechanical properties including yield stress, Young's modulus, ultimate tensile strength, flexural strength, and elongation at fracture. The results demonstrate the effectiveness of the ANN model with an average error below 10%. The study also reveals the significant impact of process parameters on the mechanical properties of 3D printed parts and highlights the potential for optimizing these parameters to enhance the performance of printed components. The findings of this research contribute to the field of additive manufacturing by providing valuable insights into the optimization of 3D printing processes and facilitating the development of high-performance 3D printed components.

Zitieren

APA

Subramonian, S., Kadirgama, K., Al-Obaidi, A. S. M., Salleh, M. S. M., Vatesh, U. K., Pujari, S., Rao, D., & Ramasamy, D. (2023). Artificial Neural Network Performance Modeling and Evaluation of Additive Manufacturing 3D Printed Parts. Engineering, Technology & Applied Science Research, 13(5), 11677-11684. https://doi.org/10.48084/etasr.6185

Vancouver

Subramonian S, Kadirgama K, Al-Obaidi ASM, Salleh MSM, Vatesh UK, Pujari S, et al. Artificial Neural Network Performance Modeling and Evaluation of Additive Manufacturing 3D Printed Parts. Engineering, Technology & Applied Science Research. 2023;13(5):11677-11684. doi:10.48084/etasr.6185

BibTeX
@article{Subramonian2023,
  author = {Subramonian, Sivarao and Kadirgama, Kumaran and Al-Obaidi, Abdulkareem Sh. Mahdi and Salleh, Mohd Shukor Mohd and Vatesh, Umesh Kumar and Pujari, Satish and Rao, Dharsyanth and Ramasamy, Devarajan},
  title = {Artificial Neural Network Performance Modeling and Evaluation of Additive Manufacturing 3D Printed Parts},
  journal = {Engineering, Technology & Applied Science Research},
  year = {2023},
  volume = {13},
  number = {5},
  pages = {11677--11684},
  doi = {10.48084/etasr.6185}
}
Kostenlos starten →