Fracture Characteristics of 3D-Printed Polymer Parts: Role of Manufacturing Process
Journal of Manufacturing and Materials Processing · 16.10.2025 · 9 (10) · 339
DOI: 10.3390/jmmp9100339 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 16.10.2025. Verfasst von Mohammad Reza Khosravani und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Using traditional methods to fabricate geometrically complicated items was challenging, but Additive Manufacturing (AM) has made it possible. Although AM (3D printing) was first developed to produce prototypes, in recent years it has also been utilized for the fabrication of end-use products. As a result, the mechanical strength of AMed parts has gained considerable significance. Three-dimensional printing has proved its capabilities in the fabrication of customizable parts with complex geometries. In the current study, the effects of manufacturing parameters on the mechanical strength and the fracture behavior of 3D-printed components have been investigated. To this aim, we fabricated specimens using Polyethylene Terephthalate Glycol (PETG) and the Fused Deposition Modeling (FDM) process. Particularly, the dumbbell-shaped and Single Edge Notched Bend (SENB) specimens were fabricated and examined to determine their tensile and fracture behaviors. Particularly, the notches in SENB specimens were introduced by two different techniques to investigate the influence of the manufacturing process on the mechanical performance of 3D-printed PETG parts. Moreover, finite element simulations were conducted to investigate the fracture behavior of the parts. The results indicate that the fracture loads of 3D-printed and milled parts are 599.1 N and 417.2 N, respectively. In addition, experiments confirm brittle fracture with no plastic deformation in all specimens with 3D-printed and milled notches. The outcomes of this study can be used for the future designs of FDM 3D-printed parts with a better structural performance.
Zitieren
APA
Khosravani, M. R., Soltani, P., Ayatollahi, M. R., & Reinicke, T. (2025). Fracture Characteristics of 3D-Printed Polymer Parts: Role of Manufacturing Process. Journal of Manufacturing and Materials Processing, 9(10), 339. https://doi.org/10.3390/jmmp9100339
Vancouver
Khosravani MR, Soltani P, Ayatollahi MR, Reinicke T. Fracture Characteristics of 3D-Printed Polymer Parts: Role of Manufacturing Process. Journal of Manufacturing and Materials Processing. 2025;9(10):339. doi:10.3390/jmmp9100339
BibTeX
@article{Khosravani2025,
author = {Khosravani, Mohammad Reza and Soltani, Payam and Ayatollahi, Majid R. and Reinicke, Tamara},
title = {Fracture Characteristics of 3D-Printed Polymer Parts: Role of Manufacturing Process},
journal = {Journal of Manufacturing and Materials Processing},
year = {2025},
volume = {9},
number = {10},
pages = {339},
doi = {10.3390/jmmp9100339}
}
EUVIMED