Multi-Objective Optimization of the Hard Milling Process for Cr12MoV Alloy Steel Using the Response Surface Methodology Coupled with Grey Relational Analysis
Engineering, Technology & Applied Science Research · 11.08.2026 · 16 (4) · 38111-38117
DOI: 10.48084/etasr.19571 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 11.08.2026. Verfasst von Trieu Quy Huy. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Cr12MoV alloy steel is a significant material in the mold and die industry, yet it is challenging to machine after heat treatment to a hardness of 55-60 HRC. This study focuses on the multi-objective optimization of cutting parameters, including cutting speed (V) and feed rate (f), to minimize cutting force and surface roughness while maximizing tool life during finish milling with TiAlN-coated carbide inserts. The experiments were designed using a Central Composite Design (CCD) within Response Surface Methodology (RSM), and the results were analyzed using the Grey Relational Analysis (GRA) method to determine the Grey Relational Grade (GRG). The Analysis of Variance (ANOVA) results indicate that the feed rate is the most influential factor on overall machining performance, with a contribution of 66.1%, followed by cutting speed at 31.5%. The optimal cutting conditions were V = 100 m/min and f = 170 mm/min, yielding the best machining process, the lowest Fc, and increased tool life. Scanning Electron Microscopy (SEM) analysis confirms that in the high-velocity region, the wear mechanism shifts from coating chipping to stable diffusion and adhesive wear. The resulting surface roughness (Ra) was 1.443 µm, meeting technical requirements and providing scientific data for establishing machining processes for hard steel in industrial production/guidance for the machining of hardened Cr12MoV steel.
Zitieren
APA
Huy, T. Q. (2026). Multi-Objective Optimization of the Hard Milling Process for Cr12MoV Alloy Steel Using the Response Surface Methodology Coupled with Grey Relational Analysis. Engineering, Technology & Applied Science Research, 16(4), 38111-38117. https://doi.org/10.48084/etasr.19571
Vancouver
Huy TQ. Multi-Objective Optimization of the Hard Milling Process for Cr12MoV Alloy Steel Using the Response Surface Methodology Coupled with Grey Relational Analysis. Engineering, Technology & Applied Science Research. 2026;16(4):38111-38117. doi:10.48084/etasr.19571
BibTeX
@article{Huy2026,
author = {Huy, Trieu Quy},
title = {Multi-Objective Optimization of the Hard Milling Process for Cr12MoV Alloy Steel Using the Response Surface Methodology Coupled with Grey Relational Analysis},
journal = {Engineering, Technology & Applied Science Research},
year = {2026},
volume = {16},
number = {4},
pages = {38111--38117},
doi = {10.48084/etasr.19571}
}
EUVIMED