EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling and Analysis of the Cutting Force Components in the Hard Milling of Hardened Cr12MoV Steel

Huy Trieu Quy

Engineering, Technology & Applied Science Research · 06.06.2026 · 16 (3) · 34824-34829

DOI: 10.48084/etasr.17456 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering, Technology & Applied Science Research, online erschienen am 06.06.2026. Verfasst von Huy Trieu Quy. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the tough milling of hardened tool steels, cutting forces significantly affect process stability, tool wear, and spindle load. This study experimentally explores the orthogonal cutting force components (Fx, Fy, Fz) during hard milling of hardened Cr12MoV steel (48-52 HRC) using TiAlN-coated carbide inserts. Central Composite Design (CCD) combined with Response Surface Methodology (RSM) was used to model the effects of cutting speed and feed rate. Second-order regression models were created and statistically validated with Analysis of Variance (ANOVA). The results show that cutting speed decreases forces mainly due to thermal softening, while feed rate raises forces mainly because of increased chip thickness. Among the components, Fy is the most sensitive to dynamic excitation. Based on these models, a stable cutting window is proposed for industrial use. The findings offer a dependable empirical basis for force prediction and the safe selection of parameters in finish hard milling of Cr12MoV die steel.

Zitieren

APA

Quy, H. T. (2026). Modeling and Analysis of the Cutting Force Components in the Hard Milling of Hardened Cr12MoV Steel. Engineering, Technology & Applied Science Research, 16(3), 34824-34829. https://doi.org/10.48084/etasr.17456

Vancouver

Quy HT. Modeling and Analysis of the Cutting Force Components in the Hard Milling of Hardened Cr12MoV Steel. Engineering, Technology & Applied Science Research. 2026;16(3):34824-34829. doi:10.48084/etasr.17456

BibTeX
@article{Quy2026,
  author = {Quy, Huy Trieu},
  title = {Modeling and Analysis of the Cutting Force Components in the Hard Milling of Hardened Cr12MoV Steel},
  journal = {Engineering, Technology & Applied Science Research},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {34824--34829},
  doi = {10.48084/etasr.17456}
}
Kostenlos starten →