EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Process Optimization of Micro-Milling Titanium Alloy Ti6Al4V for Microgrooves

Yabo Zhang, Chenyang Wang, Qingshun Bai iD, Qiqin Zhang, Xin He

Materials · 20.05.2026 · 19 (10) · 2142

DOI: 10.3390/ma19102142 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.05.2026. Verfasst von Yabo Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: China Airborne Missile Academy, Luoyang 471009, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-quality microgrooves obtained in micro-milling titanium alloy Ti6Al4V are still challenging work due to the dependence of burr formation and surface roughness on cutting parameters. In this paper, the systematic analysis of the micro-milling process was conducted to obtain high-quality titanium alloy Ti6Al4V microgrooves, which is based on single-factor experiments, orthogonal experiments, intuitive analysis, range analysis, regression analysis, and multi-objective optimization. The range of factors and factors of orthogonal experiments were determined by single-factor experiments. Orthogonal experiments were conducted with a three-factor three-level design, which regards the total top-burr width and the bottom surface roughness of microgrooves as the response variables, and factors are spindle speed, feed per tooth, and the axial depth of cut. The optimal cutting parameters, which minimize the surface roughness and burr formation, and the main influence factor were determined by intuitive analysis, range analysis, regression analysis, and NSGA-II multi-objective optimization. Simultaneously, high-quality complex microgrooves were achieved with the optimal cutting parameters. The method of systematic experimental design and data analysis in this paper can provide the theoretical guideline and technical support for the processing development of complex parts.

Schlagwörter

Stichwörter der Autor:innen

micro-millingmulti-objective process optimizationorthogonal experimentssingle-factor experimentstitanium alloy Ti6Al4V microgrooves

Autor:innen und Institutionen

  • China Airborne Missile Academy, Luoyang 471009, China.
  • School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin 150001, China.
  • School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China.

ORCID-Profile: Qingshun Bai

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, Y., Wang, C., Bai, Q., Zhang, Q., & He, X. (2026). Multi-Objective Process Optimization of Micro-Milling Titanium Alloy Ti6Al4V for Microgrooves. Materials, 19(10), 2142. https://doi.org/10.3390/ma19102142

Vancouver

Zhang Y, Wang C, Bai Q, Zhang Q, He X. Multi-Objective Process Optimization of Micro-Milling Titanium Alloy Ti6Al4V for Microgrooves. Materials. 2026;19(10):2142. doi:10.3390/ma19102142

BibTeX
@article{Zhang2026,
  author = {Zhang, Yabo and Wang, Chenyang and Bai, Qingshun and Zhang, Qiqin and He, Xin},
  title = {Multi-Objective Process Optimization of Micro-Milling Titanium Alloy Ti6Al4V for Microgrooves},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {10},
  pages = {2142},
  doi = {10.3390/ma19102142}
}
Kostenlos starten →