The role of tempering conditions and Cr content on the microstructure and mechanical performance of 0.16C-5.5Mn steel
Türk Doğa ve Fen Dergisi · 30.03.2026 · 15 (1) · 1-16
DOI: 10.46810/tdfd.1740022 ↗Kurz gefasst
Fachartikel in der Zeitschrift Türk Doğa ve Fen Dergisi, online erschienen am 30.03.2026. Verfasst von Fatih Demir und 1 weiteren Autor:innen. Die Arbeit nennt 63 Literaturangaben.
Abstract (Originalsprache)
In this paper, the role of tempering conditions and Cr content on the microstructure and mechanical performance of 0.16C-5.5Mn medium manganese steel is discussed. For this purpose, various analyses were applied to 0.16C-5.5Mn steels with 0% Cr and 1.2% Cr content for microstructural characterization. The results obtained showed that the tempering process produced a microstructure consisting of ferrite and fine acicular carbides dispersed in the tempered martensite matrix in 0.16C-5.5Mn steel. It was also observed that the retained austenite phase persisted in the microstructure after tempering. In addition, the Cr content in 0.16C-5.5Mn steel improved the stability of the retained austenite phase after tempering. When all these results were correlated with the data obtained from mechanical tests, it was observed that tempering treatment at low temperatures and Cr content in the steel composition significantly improved the combination of tensile strength and total elongation (TS×TE) of 0.16C-5.5Mn medium manganese steel.
Zitieren
APA
Demir, F., & Eroğlu, M. (2026). The role of tempering conditions and Cr content on the microstructure and mechanical performance of 0.16C-5.5Mn steel. Türk Doğa ve Fen Dergisi, 15(1), 1-16. https://doi.org/10.46810/tdfd.1740022
Vancouver
Demir F, Eroğlu M. The role of tempering conditions and Cr content on the microstructure and mechanical performance of 0.16C-5.5Mn steel. Türk Doğa ve Fen Dergisi. 2026;15(1):1-16. doi:10.46810/tdfd.1740022
BibTeX
@article{Demir2026,
author = {Demir, Fatih and Eroğlu, Mehmet},
title = {The role of tempering conditions and Cr content on the microstructure and mechanical performance of 0.16C-5.5Mn steel},
journal = {Türk Doğa ve Fen Dergisi},
year = {2026},
volume = {15},
number = {1},
pages = {1--16},
doi = {10.46810/tdfd.1740022}
}
EUVIMED