EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Tempering Temperature on Microstructure and Mechanical Properties of Cr-Ni-Mo-V Rotor Steel

Chao Zhao iD, Xinyi Zhang, Xiaojie Liang, Guowang Song, Bin Wang, Liqiang Guo, Pengjun Zhang, Shuguang Zhang

Materials · 26.01.2025 · 18 (3) · 555

DOI: 10.3390/ma18030555 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.01.2025. Verfasst von Chao Zhao und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, North University of China, Taiyuan 030051, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Natural Science Foundation of Shanxi Province (CN), Shanxi Province Key Research and Development Program Project (CN).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, we investigated the effects of the matrix and precipitates in Cr-Ni-Mo-V rotor steel on its mechanical properties after water quenching and tempering (450–700 °C). The results indicate that the microstructure and mechanical properties of the steel can be significantly adjusted by changing the tempering temperature. An excellent combination of tensile strength (1028.608 MPa) and elongation (19%) was obtained upon tempering at 650 °C. This is attributed to the martensite lath with a high dislocation density, solid solution strengthening and the strengthening effect of spherical Mo2C and VC particles. At a tempering temperature of 550 °C, the precipitation and development of rod-shaped Fe3Mo3C resulted in a considerable drop in strength. At 650 °C, the dissolution of Fe3Mo3C and dispersion precipitation of Mo2C and VC led to a large rise in strength. At 700 °C, the coarsening of Mo2C and VC, together with the recrystallization of the martensite lath, resulted in a loss in strength. Meanwhile, as the tempering temperature was increased from 450 °C to 700 °C, the tensile fracture characteristics of Cr-Ni-Mo-V rotor steel gradually changed from cleavage fractures to dimple fractures.

Schlagwörter

Stichwörter der Autor:innen

Cr-Ni-Mo-V rotor steelcarbidemechanical propertiestempering temperature

Autor:innen und Institutionen

  • School of Mechanical and Electrical Engineering, North University of China, Taiyuan 030051, China.
  • Taiyuan Heavy Industry Co., Ltd., Taiyuan 030051, China.
  • First Machinery Group Firmaco Shanxinorth Machine Buliding Co., Ltd., Taiyuan 030051, China.
  • College of Materials Science and Engineering, Hohai University, Nanjing 211100, China.

ORCID-Profile: Chao Zhao

Förderung

  • National Natural Science Foundation of China
  • the Natural Science Foundation of Shanxi Province (CN)
  • Shanxi Province Key Research and Development Program Project (CN)
  • Natural Science Foundation of Shanxi Province (CN)

Zitieren

APA

Zhao, C., Zhang, X., Liang, X., Song, G., Wang, B., Guo, L., Zhang, P., & Zhang, S. (2025). Effect of Tempering Temperature on Microstructure and Mechanical Properties of Cr-Ni-Mo-V Rotor Steel. Materials, 18(3), 555. https://doi.org/10.3390/ma18030555

Vancouver

Zhao C, Zhang X, Liang X, Song G, Wang B, Guo L, et al. Effect of Tempering Temperature on Microstructure and Mechanical Properties of Cr-Ni-Mo-V Rotor Steel. Materials. 2025;18(3):555. doi:10.3390/ma18030555

BibTeX
@article{Zhao2025,
  author = {Zhao, Chao and Zhang, Xinyi and Liang, Xiaojie and Song, Guowang and Wang, Bin and Guo, Liqiang and Zhang, Pengjun and Zhang, Shuguang},
  title = {Effect of Tempering Temperature on Microstructure and Mechanical Properties of Cr-Ni-Mo-V Rotor Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {555},
  doi = {10.3390/ma18030555}
}
Kostenlos starten →