Effect of Tempering Temperature on Microstructure and Mechanical Properties of 35CrMo Steel
Metals · 15.04.2023 · 13 (4) · 771
DOI: 10.3390/met13040771 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 15.04.2023. Verfasst von Qichao Ren und 4 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
In this paper, the influence mechanism of tempering temperature on the microstructure and mechanical properties of 35CrMo steel used in the hammerhead of piston-type impact pile hammer is systematically analyzed. The microstructure was characterized by scanning and transmission electron microscope, X-ray diffraction, and electron backscattering diffraction, and the mechanical properties were tested by the uniaxial tensile test and Charpy V-notch impact test. The results show that after tempering at 580–680 °C, the microstructure of 35CrMo is tempered sorbite. With the increase in tempering temperature, the α phase in the matrix gradually recovers, the dislocation density decreases, the low-angle grain boundaries gradually change to the high-angle grain boundaries, and the carbides gradually change from long rod-shaped network continuous distribution to spherical uniform dispersion distribution, but all of them are M3C. Meanwhile, with the increase in tempering temperature, the strength decreases and the toughness increases, which is mainly affected by dislocation density and matrix supersaturation. Furthermore, 35CrMo enters the two-phase zone after tempering at 710–740 °C, and its microstructure is lamellar martensite, with carbide dissolved. At this point, its mechanical properties mainly depend on grain size.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Ren, Q., Kou, Z., Wu, J., Hou, T., & Xu, P. (2023). Effect of Tempering Temperature on Microstructure and Mechanical Properties of 35CrMo Steel. Metals, 13(4), 771. https://doi.org/10.3390/met13040771
Vancouver
Ren Q, Kou Z, Wu J, Hou T, Xu P. Effect of Tempering Temperature on Microstructure and Mechanical Properties of 35CrMo Steel. Metals. 2023;13(4):771. doi:10.3390/met13040771
BibTeX
@article{Ren2023,
author = {Ren, Qichao and Kou, Ziming and Wu, Juan and Hou, Tengyan and Xu, Peng},
title = {Effect of Tempering Temperature on Microstructure and Mechanical Properties of 35CrMo Steel},
journal = {Metals},
year = {2023},
volume = {13},
number = {4},
pages = {771},
doi = {10.3390/met13040771}
}
EUVIMED