Optimization of machining parameters of hard porcelain on a CNC machine by Taguchi-and RSM method
International Journal of Engineering, Science and Technology · 2018
DOI: 10.4314/ijest.v10i1.2 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Engineering, Science and Technology, 2018. Verfasst von Saurabh Agrawal und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
In order to build up a relationship between quality and productivity, the present work focuses an optimized approach to establishing the multi-objective machining parameters and mathematical models for Pressure and Voltage on CNC turning machine (SINUMERIK802D). The Pressure and Voltage seem to be known as quality issues; they are as well presumed to have direct association with productivity. In this study, minimization of response parameters has been identified by using design of experimental methods, Taguchi Analysis and Response surface methodology (RSM). The conduct of experiments was made by employing the Taguchi’s L27 Orthogonal array to design the experiment by considering spindle speed (SS), feed rate (FR), angle of cut (AOC) and depth of cut (DOC) as Machining parameters. The model for the Pressure and Voltage, as the function of response parameters, is obtained using the RSM. Finally, the result of developed mathematical model is examined by ANOVA. Experimental results indicate that the feed rate, angle of cut and depth of cut are the leading parameters that affect the Pressure (P). similarly for Voltage (V), all the cutting parameters (Spindle speed, feed rate, angle of cut and depth of cut) are found to be significant, which can be diminished when the significant factors were kept at the lower level, while other factors were kept at the highest level. On the Basis of analysis, it is found that both the optimization techniques predict the results in fair agreement.Keywords:SINUMERIK802D, Machining parameters, RSM, Taguchi Method, ANOVA.
Zitieren
APA
Agrawal, S., Gaur, M. K., Kasdekar, D. K., & Agrawal, S. (2018). Optimization of machining parameters of hard porcelain on a CNC machine by Taguchi-and RSM method. International Journal of Engineering, Science and Technology. https://doi.org/10.4314/ijest.v10i1.2
Vancouver
Agrawal S, Gaur MK, Kasdekar DK, Agrawal S. Optimization of machining parameters of hard porcelain on a CNC machine by Taguchi-and RSM method. International Journal of Engineering, Science and Technology. 2018. doi:10.4314/ijest.v10i1.2
BibTeX
@article{Agrawal2018,
author = {Agrawal, Saurabh and Gaur, Manoj kumar and Kasdekar, Dinesh kumar and Agrawal, Sharad},
title = {Optimization of machining parameters of hard porcelain on a CNC machine by Taguchi-and RSM method},
journal = {International Journal of Engineering, Science and Technology},
year = {2018},
doi = {10.4314/ijest.v10i1.2}
}
EUVIMED