EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of the Taguchi method and RSM for process parameter optimization in AWSJ machining of CFRP composite-based orthopedic implants

Ramesha Kodandappa, Santhosh Nagaraja, Manjunatha Matnahalli Chowdappa, Manjunath Krishnappa, Gubbi Shivarathri Poornima, Muhammad Imam Ammarullah

Open Engineering · 04.07.2024 · 14 (1)

DOI: 10.1515/eng-2024-0057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Open Engineering, online erschienen am 04.07.2024. Verfasst von Ramesha Kodandappa und 5 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Abrasive water suspension jet (AWSJ) machining on carbon fiber-reinforced polymer (CFRP) composite-based orthopedic implants yielded insightful results based on experimental data and subsequent statistical validations. Underwater AWSJ cutting consistently outperformed free air cutting, with numerical findings demonstrating its superiority. For instance, at #100 abrasive size and 5 mm standoff distance (SOD), the material removal rate (MRR) peaked at 2.44 g/min with a kerf width of 0.89 mm and a surface roughness (SR) of 9.25 µm. Notably, the increase in abrasive size correlated with higher MRR values, such as achieving 2.15 g/min at #120 grit and 3 mm SOD. Furthermore, optimization techniques like the Taguchi method and response surface methodology (RSM) were applied to refine machining parameters. These methodologies enhanced MRR, exemplified by achieving 2.10 g/min with #120 abrasive size and 5 mm SOD in underwater cutting conditions. The research explored the impact of key process parameters, namely, the speed, feed, and SOD on the MRR, kerf width, and SR in both free air cutting and underwater cutting conditions, which is one of the novel research endeavors in the domain of abrasive jet machining of composites.

Zitieren

APA

Kodandappa, R., Nagaraja, S., Chowdappa, M. M., Krishnappa, M., Poornima, G. S., & Ammarullah, M. I. (2024). Application of the Taguchi method and RSM for process parameter optimization in AWSJ machining of CFRP composite-based orthopedic implants. Open Engineering, 14(1). https://doi.org/10.1515/eng-2024-0057

Vancouver

Kodandappa R, Nagaraja S, Chowdappa MM, Krishnappa M, Poornima GS, Ammarullah MI. Application of the Taguchi method and RSM for process parameter optimization in AWSJ machining of CFRP composite-based orthopedic implants. Open Engineering. 2024;14(1). doi:10.1515/eng-2024-0057

BibTeX
@article{Kodandappa2024,
  author = {Kodandappa, Ramesha and Nagaraja, Santhosh and Chowdappa, Manjunatha Matnahalli and Krishnappa, Manjunath and Poornima, Gubbi Shivarathri and Ammarullah, Muhammad Imam},
  title = {Application of the Taguchi method and RSM for process parameter optimization in AWSJ machining of CFRP composite-based orthopedic implants},
  journal = {Open Engineering},
  year = {2024},
  volume = {14},
  number = {1},
  doi = {10.1515/eng-2024-0057}
}
Kostenlos starten →