Corrosion Layer Removal from 304L Stainless Steel and Airborne Particle Generation and Filtration under Different Laser Scanning Conditions
Journal of Powder Materials · 31.10.2026 · 33 (5) · 348-355
DOI: 10.4150/jpm.2026.00199 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Powder Materials, erschienen am 31.10.2026. Verfasst von Hyun Jong Yoo und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Hanbat National University.
Abstract (Originalsprache)
Laser surface cleaning (LSC) can remove corrosion layers without chemicals or abrasives but releases airborne particles that require control for safe industrial use. We cleaned artificially corroded 304L stainless steel with a 1200 W nanosecond Nd:YAG laser using three scanning strategies: a single pass with a 1.8 mm hatch distance (LSC 1.8), 18 offset passes at 1.8 mm (LSC 1.8/18), and a single pass at 0.1 mm (LSC 0.1). Residual corrosion products remained after LSC 1.8, whereas LSC 1.8/18 and LSC 0.1 removed the corrosion layer. Peak particle number concentrations were 4.71 × 106, 7.67 × 106, and 8.25 × 106 #/cm³, respectively, and modal diameters ranged from 112 to 121 nm. After normalization by the thickness of the removed layer, peak concentrations differed by only about 1.4% between LSC 1.8/18 and LSC 0.1, indicating that the concentration difference was mainly associated with the amount of material removed. Transmission electron microscopy showed agglomerates of nanoscale primary particles joined by necks; energy-dispersive X-ray spectroscopy and selected-area electron diffraction identified Fe–Cr–O particles with a spinel structure consistent with (Fe,Cr)₃O₄. H13-grade high-efficiency particulate air filtration achieved particle removal efficiencies of 99.95–99.98% across all conditions.
Förderung
- Hanbat National University
Zitieren
APA
Yoo, H. J., Park, C., & Kim, J. H. (2026). Corrosion Layer Removal from 304L Stainless Steel and Airborne Particle Generation and Filtration under Different Laser Scanning Conditions. Journal of Powder Materials, 33(5), 348-355. https://doi.org/10.4150/jpm.2026.00199
Vancouver
Yoo HJ, Park C, Kim JH. Corrosion Layer Removal from 304L Stainless Steel and Airborne Particle Generation and Filtration under Different Laser Scanning Conditions. Journal of Powder Materials. 2026;33(5):348-355. doi:10.4150/jpm.2026.00199
BibTeX
@article{Yoo2026,
author = {Yoo, Hyun Jong and Park, Changkyoo and Kim, Jeoung Han},
title = {Corrosion Layer Removal from 304L Stainless Steel and Airborne Particle Generation and Filtration under Different Laser Scanning Conditions},
journal = {Journal of Powder Materials},
year = {2026},
volume = {33},
number = {5},
pages = {348--355},
doi = {10.4150/jpm.2026.00199}
}
EUVIMED