Effect of Laser Peening on the Corrosion Properties of 304L Stainless Steel
Materials · 13.01.2023 · 16 (2) · 804
DOI: 10.3390/ma16020804 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.01.2023. Verfasst von Young-Ran Yoo und 2 weiteren Autor:innen. Beteiligte Einrichtung: Materials Research Centre for Energy and Clean Technology, Andong National University, 1375 Gyeongdong-ro, Andong 36729, Republic of Korea. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Andong National University.
Abstract (Originalsprache)
Dry canisters used in nuclear power plants can be subject to localized corrosion, including stress corrosion cracking. External and residual tensile stress can facilitate the occurrence of stress corrosion cracking. Residual stress can arise from welding and plastic deformation. Mitigation methods of residual stress depend upon the energy used and include laser peening, ultrasonic peening, ultrasonic nanocrystal surface modification, shot peening, or water jet peening. Among these, laser peening technology irradiates a continuous laser beam on the surface of metals and alloys at short intervals to add compressive residual stress as a shock wave is caused. This research studied the effect of laser peening with/without a thin aluminum layer on the corrosion properties of welded 304L stainless steel. The intergranular corrosion rate of the laser-peened specimen was a little faster than the rate of the non-peened specimen. However, laser peening enhanced the polarization properties of the cross-section of 304L stainless steel, while the properties of the surface were reduced by laser peening. This behavior was discussed on the basis of the microstructure and residual stress.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Materials Research Centre for Energy and Clean Technology, Andong National University, 1375 Gyeongdong-ro, Andong 36729, Republic of Korea.
- School of Materials Science and Engineering, Andong National University, 1375 Gyeongdong-ro, Andong 36729, Republic of Korea.
ORCID-Profile: Young-Ran Yoo, Young-Sik Kim
Förderung
- Andong National University
Zitieren
APA
Yoo, Y. R., Choi, S. H., & Kim, Y. S. (2023). Effect of Laser Peening on the Corrosion Properties of 304L Stainless Steel. Materials, 16(2), 804. https://doi.org/10.3390/ma16020804
Vancouver
Yoo YR, Choi SH, Kim YS. Effect of Laser Peening on the Corrosion Properties of 304L Stainless Steel. Materials. 2023;16(2):804. doi:10.3390/ma16020804
BibTeX
@article{Yoo2023,
author = {Yoo, Young-Ran and Choi, Seung-Heon and Kim, Young-Sik},
title = {Effect of Laser Peening on the Corrosion Properties of 304L Stainless Steel},
journal = {Materials},
year = {2023},
volume = {16},
number = {2},
pages = {804},
doi = {10.3390/ma16020804}
}
EUVIMED