EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite Element Simulation of the Laser Shock Peening Process on 304L Stainless Steel

Mayur B Wakchaure, Manoranjan Misra, Pradeep L Menezes iD

Materials · 23.06.2025 · 18 (13) · 2958

DOI: 10.3390/ma18132958 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.06.2025. Verfasst von Mayur B Wakchaure und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Nevada, Reno, NV 89557, USA. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United States Department of Energy, DoE-NEUP Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of Laser Shock Peening (LSP) on residual stress distribution and surface deformation using a Finite Element Method (FEM) model. LSP is a surface treatment process that generates compressive residual stress by applying high-energy laser pulses over nanosecond timescales. The study aims to analyze the impact of key parameters, specifically laser spot overlap rate and power density, on the induced residual stress and surface deformation. A Design of Experiment (DOE) approach was used to systematically vary these parameters. These simulations were performed using the ANSYS Explicit Dynamics FEM with a Johnson–Cook material model to capture the nonlinear constitutive behavior. The research analyzes the distribution of residual stress and surface deformation caused by LSP. Increasing laser spot overlap and power density leads to higher compressive residual stress and surface deformation, revealing two distinct behavioral outcomes: either deep compressive stress with minimal deformation or a transition from compressive to tensile stress followed by significant surface deformation and a subsequent return to compressive stress. The results demonstrate strong agreement with existing experimental data presented in the literature. This study contributes novel insights into the interaction between LSP parameters and their effects on material properties, with implications for understanding LSP techniques in practical applications. The triangular pulse model and dual-overlap analysis offer a novel simulation strategy for optimizing LSP parameters in stainless steel.

Schlagwörter

Stichwörter der Autor:innen

finite element analysislaser shock peeningresidual stresses

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Nevada, Reno, NV 89557, USA.
  • Department of Chemical and Materials Engineering, University of Nevada, Reno, NV 89557, USA.

ORCID-Profile: Pradeep L Menezes

Förderung

  • United States Department of Energy
  • DoE-NEUP Project

Zitieren

APA

Wakchaure, M. B., Misra, M., & Menezes, P. L. (2025). Finite Element Simulation of the Laser Shock Peening Process on 304L Stainless Steel. Materials, 18(13), 2958. https://doi.org/10.3390/ma18132958

Vancouver

Wakchaure MB, Misra M, Menezes PL. Finite Element Simulation of the Laser Shock Peening Process on 304L Stainless Steel. Materials. 2025;18(13):2958. doi:10.3390/ma18132958

BibTeX
@article{Wakchaure2025,
  author = {Wakchaure, Mayur B and Misra, Manoranjan and Menezes, Pradeep L},
  title = {Finite Element Simulation of the Laser Shock Peening Process on 304L Stainless Steel},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {13},
  pages = {2958},
  doi = {10.3390/ma18132958}
}
Kostenlos starten →