EUVIMEDEUVIMED entdecken
Open Access

Finite Element Analysis of New Modified Three-dimensional Strut Miniplate versus Conventional Plating in Mandibular Symphysis and Angle Fractures - An In vitro Study

Haren Pandya, Hiren Patel, Smit Vithalani, Bijal Bhavsar, Urvi Shah, Aliasgar Chunawala

Annals of Maxillofacial Surgery · 2024-01 · 14 (1) · 71-75

DOI: 10.4103/ams.ams_205_23 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Annals of Maxillofacial Surgery, online erschienen am 08.05.2024. Verfasst von Haren Pandya und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral and Maxillofacial Surgery, Faculty of Dental Science, Nadiad, Gujarat, India. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

Mandibular fractures are common injuries during maxillofacial trauma, and currently, open reduction and internal fixation are considered gold-standard treatments. There is a wide discussion about which plates give the best outcomes. Hence, we are conducting a biomechanical comparison of two plates for mandibular symphysis and angle fracture with finite element analysis (FEA). The aim of this study was to do a comparative study of FEA between the conventional and our new modified three-dimensional (3D) strut miniplate in mandibular fractures at symphysis and angle regions. Materials and Methods: Finite element models of symphyseal and angle fractures of the mandible were developed. Each fracture model was then realigned and fixed by the conventional method 2.0 mm system, and our modified 3D strut plating method 2.0 mm system followed by the analysis of various stresses developed in plates and mandibular fracture area after application of load was observed in the study.

Results

The modified 3D strut plating system with 2.0 mm miniplates is significantly better in preventing displacement of fracture segments by better distribution of forces compared to the conventional plating system. Rest of the parameters were within the permitted limits.

Discussion

Modified 3D strut plating method was reasonably effective and superior in managing force-displacement compared to the conventional method of fixation for comminuted and unfavourable mandibular symphyseal fracture and angle fracture.

Schlagwörter

Stichwörter der Autor:innen

Displacement of fractureVon Mises stressesfinite element analysismandibular angle fracturemandibular symphysis fracture

Autor:innen und Institutionen

  • Department of Oral and Maxillofacial Surgery, Faculty of Dental Science, Nadiad, Gujarat, India.

Zitieren

APA

Pandya, H., Patel, H., Vithalani, S., Bhavsar, B., Shah, U., & Chunawala, A. (2024). Finite Element Analysis of New Modified Three-dimensional Strut Miniplate versus Conventional Plating in Mandibular Symphysis and Angle Fractures - An In vitro Study. Annals of Maxillofacial Surgery, 14(1), 71-75. https://doi.org/10.4103/ams.ams_205_23

Vancouver

Pandya H, Patel H, Vithalani S, Bhavsar B, Shah U, Chunawala A. Finite Element Analysis of New Modified Three-dimensional Strut Miniplate versus Conventional Plating in Mandibular Symphysis and Angle Fractures - An In vitro Study. Annals of Maxillofacial Surgery. 2024;14(1):71-75. doi:10.4103/ams.ams_205_23

BibTeX
@article{Pandya2024,
  author = {Pandya, Haren and Patel, Hiren and Vithalani, Smit and Bhavsar, Bijal and Shah, Urvi and Chunawala, Aliasgar},
  title = {Finite Element Analysis of New Modified Three-dimensional Strut Miniplate versus Conventional Plating in Mandibular Symphysis and Angle Fractures - An In vitro Study},
  journal = {Annals of Maxillofacial Surgery},
  year = {2024},
  volume = {14},
  number = {1},
  pages = {71--75},
  doi = {10.4103/ams.ams_205_23}
}
Kostenlos starten →