EUVIMEDEUVIMED entdecken
Crossref

Thermosonic Gold Stud Bump Attach for Large ICs on Laminate Substrates

Ian Hardy

IMAPSource Proceedings · 09.07.2026 · 2008 (Symposium)

DOI: 10.4071/001c.164854 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 09.07.2026. Verfasst von Ian Hardy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Miniaturization and reliability are the two most critical aspects when designing packaging for an implantable electronic medical device. As sizes of implantable devices shrink, more mature packaging methods such as wire bonding become less feasible due to the additional layout area that is required. A flip chip package that employs gold stud bump interconnects is a proven alternative to both chip/wire assembly and flip chips that rely on wafer-level bump redistribution. Gold stud bumping offers several advantages over wafer-level bumping, such as increased flexibility and cost-effectiveness for prototype and small run environments. This assembly methodology consists of three primary steps: 1. 1) Bumping of the silicon IC using commonly available wire bonding equipment 1. 2) Connecting the bumped IC directly to the substrate by thermosonic Au-Au bonding 1. 3) Dispensing of an underfill material for environmental protection and mechanical stability This type of interconnect is common for small devices with low I/O counts, but newer models of flip chip placement equipment are pushing the longstanding limitations of this process. This paper discusses the development and testing of a thermosonic gold stud bump attach process for a large silicon IC (7.5 x 11 mm with 102 I/Os) to an organic laminate PCB.

Zitieren

APA

Hardy, I. (2026). Thermosonic Gold Stud Bump Attach for Large ICs on Laminate Substrates. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.164854

Vancouver

Hardy I. Thermosonic Gold Stud Bump Attach for Large ICs on Laminate Substrates. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.164854

BibTeX
@article{Hardy2026,
  author = {Hardy, Ian},
  title = {Thermosonic Gold Stud Bump Attach for Large ICs on Laminate Substrates},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2008},
  number = {Symposium},
  doi = {10.4071/001c.164854}
}
Kostenlos starten →