A Comparative Study: Thermosonic Bonding of Flip Chips with Gold Stud Bumps to a Variety of Organic Substrates
IMAPSource Proceedings · 26.06.2026 · 2008 (Symposium)
DOI: 10.4071/001c.164113 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 26.06.2026. Verfasst von Nick Stolper und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Thermosonic flip chip bonding to ceramic substrates is a well understood and reliable connection method usually reserved for lower I/O devices. This process facilitates smaller package sizes and improved electrical performance over the traditional wire bonding process. Recently there has been increased interest among package designers to expand the range of available substrates to include organic materials. This move also improves the cost-competitiveness of the package while maintaining required high performance requirements of the device. This article will define the requirements necessary for gold to gold bonding of a flip chip die to organic substrates, and will investigate the effect and reliability of various organic substrate materials such as FR4, BT and HT (high temp) under different process conditions using a Au to Au interconnect flip chip process. Device assembly processes covering Au to Au interconnections as well as the underfill process is investigated with special emphasis on product reliability for each type of organic substrate mentioned above. Critical Au to Au process parameters such as temperature, bonding pressure, ultrasonic power setting and time duration for optimal bonding conditions will also be established. The reliability evaluation will concentrate on thermo-mechanical robustness and electrical functionality of the final assembly. The reliability tests used are Ball Bond Shear Test, Electrical Testing, Die Shear Testing and Temperature Cycling. Au bump alignment accuracy with respect to the Au bond pads is checked using X-ray inspection. Underfill quality is revealed by C-SAM inspection concentrating on voids, cracks and de-lamination defects. The evaluation will compare low cost flip-chip mounting processes using 70um diameter gold stud bump connections on three different types of organic (FR4, BT and HT) substrates that are high performance, high Tg substrates with Au/Ni/Cu material plating. Flip Chip samples consist of 7mm x 7mm test chips bumped with 112 gold stud bumps with a bump pitch down to 150um. The dies were prepared with coined bumps of 1mil Au-wire. The assembly methodology consists of four primary steps: 1) Bumping of the silicon IC utilizing common wire bonding equipment, 2) Connection of the bumped IC directly to the organic substrate by gold to gold thermosonic interconnects. 3) Underfill post-process and 4) Reliability Testing per JEDEC specifications. With recent improvements in the thermosonic bond horn design along with high Tg substrates, the ability to bond to organic substrates will be demonstrated. In particular, the bonding is accomplished by applying the required heat by means of a heated bond head, allowing the organic substrate with a significantly lower Young’s modulus (as compared with ceramic) to remain relatively cool and hence capable of forming mono-metallic Au joints.
Zitieren
APA
Stolper, N., & Ding, F. (2026). A Comparative Study: Thermosonic Bonding of Flip Chips with Gold Stud Bumps to a Variety of Organic Substrates. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.164113
Vancouver
Stolper N, Ding F. A Comparative Study: Thermosonic Bonding of Flip Chips with Gold Stud Bumps to a Variety of Organic Substrates. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.164113
BibTeX
@article{Stolper2026,
author = {Stolper, Nick and Ding, Fei},
title = {A Comparative Study: Thermosonic Bonding of Flip Chips with Gold Stud Bumps to a Variety of Organic Substrates},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.164113}
}
EUVIMED