EUVIMEDEUVIMED entdecken
Crossref

Thermosonic Gold to Gold Interconnect (GGI) Flip Chip Bonding for 7mm2 Die

Philip Couts

IMAPSource Proceedings · 29.04.2026 · 2009 (Symposium)

DOI: 10.4071/001c.161493 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 29.04.2026. Verfasst von Philip Couts.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flip Chip ultrasonic gold to gold interconnect (GGI) has provided a lead free, no clean, process solution for devices with bump counts under 100 for the past five years. The proven reliability and manufacturing cost savings of ultrasonic GGI bonding has now expanded to include large die sized up to 7mm2 with bump counts up to one hundred. The bonding accuracy of the GGI process is +/- 10 μm. The availability of a voice coil motor with 100N load capability and improved horn design has allowed for the performance improvement in thermosonic GGI flip chip bonder equipment for large die size with high I/O for device packaging. GGI CSP packaging is used for CMOS sensor, MEMs, RF, memory, and HBLED devices. Thermosonic GGI bonders use a built in monitoring function for each die bond. The bump collapse height, bond impedance, die X-off, die Y-off, and θ can be “mapped” for each die bond location in real time. The bond map data is stored as a text log file for easy access by downstream test operations. Gold bonds provide superior bond strength because of the monolithic bond structure of the gold material. Gold bonds also have superior electrical high frequency performance and low resistance when compared to solder or conductive interconnect processes. Package size reductions are achieved with flip chip thermosonic GGI process when compared to wire bonding. The robust GGI thermosonic process reliably handles gold bump diameter of 60 μm ~100 μm in high volume manufacturing. The GGI process capability has allowed die size reductions up to 70% when compared to wire bonding process. 30% less gold material is used compared to gold wire bonding since the “wire stitch” is eliminated leaving the gold ball for the GGI interconnect. Flip Chip thermosonic GGI process can bond die with thickness as thin as 100 μm. This has been an important benefit for mobile device packaging where low profile devices are critical to the market. Low cost organic substrate materials and embedded passive LTCC substrates are used in flip chip thermosonic GGI device manufacturing. Because the GGI thermosonic uses solid phase micro welding of the die to the substrate, relatively low bonding temperatures

Zitieren

APA

Couts, P. (2026). Thermosonic Gold to Gold Interconnect (GGI) Flip Chip Bonding for 7mm2 Die. IMAPSource Proceedings, 2009(Symposium). https://doi.org/10.4071/001c.161493

Vancouver

Couts P. Thermosonic Gold to Gold Interconnect (GGI) Flip Chip Bonding for 7mm2 Die. IMAPSource Proceedings. 2026;2009(Symposium). doi:10.4071/001c.161493

BibTeX
@article{Couts2026,
  author = {Couts, Philip},
  title = {Thermosonic Gold to Gold Interconnect (GGI) Flip Chip Bonding for 7mm2 Die},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2009},
  number = {Symposium},
  doi = {10.4071/001c.161493}
}
Kostenlos starten →