EUVIMEDOpdag EUVIMED
ÜbersichtsarbeitOpen access · CC BY-NC 4.0

Feasibility of a Novel In-situ Local Tumor Ablation and Recycling Machine Based on Radiofrequency Dielectric Heating: In-depth Review on Research Background and Preliminary Report of an Experimental Study

Min Wook Joo iD, Sangrok Jin iD, Gyeong-Jun Lee iD, Yong-Suk Lee iD, Yang-Guk Chung iD

Clinics in Orthopedic Surgery · 2024

DOI: 10.4055/cios23186 ↗

At a glance

Übersichtsarbeit in Clinics in Orthopedic Surgery, 2024. Written by Min Wook Joo and 4 co-authors. Institution: Department of Orthopaedic Surgery, College of Medicine, The Catholic University of Korea, Seoul, Korea. Major MEDLINE topics: Catheter Ablation, Neoplasms. Cited 3 times so far (Crossref); 30 references. The full text is freely available (open access, CC BY-NC 4.0). Funded by: St. Vincent’s Hospital, Research Institute of Medical Science Foundation, National Research Foundation of Korea.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Background

In bone sarcomas, chemotherapy has improved the prognosis with advances in diagnostic and surgical technologies, which has led to attempts to save limbs. As early detection and multidisciplinary treatment have improved the survival rate, curative surgery is considered for selected patients with metastatic bone carcinomas. Limb salvage procedures may vary in relation to the reconstruction method, which is accompanied by different complications. To overcome them, we devised a novel concept, in-situ local tumor ablation and recycling machine based on radiofrequency (RF)-induced heating and intended experiments to demonstrate its feasibility.

Methods

The fresh femurs of 6-month-old pigs were used after removing the epiphyses; the distal parts were placed in a heating chamber. Fiber-optic temperature sensors were inserted in the metaphysis, meta-diaphysis, and diaphysis. Temperatures were measured six times each during heating at 27.12 MHz at various powers. Additionally, the compressive and bending stiffnesses were measured six times each for the unprocessed, RF-treated, and pasteurized bones, and the results were compared.

Results

Under 200 W power output, the temperatures at all measurement sites reached 70 ℃ or higher in 6 minutes, and the temperatures were maintained. The median compressive stiffness of RF-heated bones was 79.2% higher than that of pasteurized bones, but the difference was statistically insignificant. The median bending stiffness of RF-heated bones was approximately 66.3% of that of unprocessed bones, which was 20% higher than that of pasteurized bones.

Conclusions

The feasibility to rapidly attain and maintain temperatures for tumor ablation is shown, which favorably preserves bone stiffness through the in-situ local tumor ablation and recycling based on RF heating. The problem of nonuniform temperature distribution might be solved by an optimal design determined from simulation research and additional experiments.

Subjects

MeSH terms (MEDLINE)

Catheter AblationNeoplasmsAnimalsComputer SimulationFeasibility StudiesHeatingHot TemperatureSwine

Author keywords

Ablation techniqueAutograftBone neoplasmsHeatingRadiofrequency ablation

Authors and institutions

  • Department of Orthopaedic Surgery, College of Medicine, The Catholic University of Korea, Seoul, Korea.
  • Department of Orthopaedic Surgery, St. Vincent's Hospital, Suwon, Korea.
  • School of Mechanical Engineering, Pusan National University, Busan, Korea.
  • Department of Orthopaedic Surgery, Incheon St. Mary's Hospital, Incheon, Korea.
  • Department of Orthopaedic Surgery, Seoul St. Mary's Hospital, Seoul, Korea.

ORCID profiles: Min Wook Joo, Sangrok Jin, Gyeong-Jun Lee, Yong-Suk Lee, Yang-Guk Chung

Funding

  • St. Vincent’s Hospital, Research Institute of Medical Science Foundation
  • National Research Foundation of Korea

Cite

APA

Joo, M. W., Jin, S., Lee, G. J., Lee, Y. S., & Chung, Y. G. (2024). Feasibility of a Novel In-situ Local Tumor Ablation and Recycling Machine Based on Radiofrequency Dielectric Heating: In-depth Review on Research Background and Preliminary Report of an Experimental Study. Clinics in Orthopedic Surgery. https://doi.org/10.4055/cios23186

Vancouver

Joo MW, Jin S, Lee GJ, Lee YS, Chung YG. Feasibility of a Novel In-situ Local Tumor Ablation and Recycling Machine Based on Radiofrequency Dielectric Heating: In-depth Review on Research Background and Preliminary Report of an Experimental Study. Clinics in Orthopedic Surgery. 2024. doi:10.4055/cios23186

BibTeX
@article{Joo2024,
  author = {Joo, Min Wook and Jin, Sangrok and Lee, Gyeong-Jun and Lee, Yong-Suk and Chung, Yang-Guk},
  title = {Feasibility of a Novel In-situ Local Tumor Ablation and Recycling Machine Based on Radiofrequency Dielectric Heating: In-depth Review on Research Background and Preliminary Report of an Experimental Study},
  journal = {Clinics in Orthopedic Surgery},
  year = {2024},
  doi = {10.4055/cios23186}
}
Start for free →