EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Transient Modelling and Experimental Validation of Hybrid Polymer-Steel Moulds for Micro-Injection Moulding

Giulia Zaniboni, Vito Basile, Riccardo Pelaccia, Rossella Surace, Keltoum Oubellaouch, Francesco Modica, Leonardo Orazi, Giovanna Rotella, Luigino Filice, Irene Fassi

Defect and Diffusion Forum · 17.04.2026 · 451 · 157-167

DOI: 10.4028/p-rd7qdb ↗

Kurz gefasst

Fachartikel in der Zeitschrift Defect and Diffusion Forum, online erschienen am 17.04.2026. Verfasst von Giulia Zaniboni und 9 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient thermal management is a key factor in improving the sustainability and productivity of injection moulding processes, particularly at the micro-scale where thermal transients strongly affect part quality and cycle stability. This work investigates the thermal behaviour of hybrid moulds composed of polymeric support plates manufactured in Precision Resin V01 and stainless-steel inserts manufactured by additive manufacturing. An experimental campaign was carried out on a micro-injection moulding machine to characterize the intrinsic thermal response of the mould under uncooled conditions. Temperatures were monitored through embedded thermocouples and used to develop and calibrate a three-dimensional transient numerical model in COMSOL Multiphysics. Particular attention was devoted to the identification and calibration of heat transfer coefficients at the injection and extraction interfaces, which were found to play a dominant role in governing insert temperature evolution. The calibrated model accurately reproduces the experimental thermal transients, with deviations below 10%, demonstrating its reliability as a predictive tool for analysing mould thermal behaviour and supporting early-stage design and process optimization. The results highlight the advantages of hybrid architectures in promoting thermal stability and provide a robust methodology for modelling heat exchange in unconventional mould configurations.

Zitieren

APA

Zaniboni, G., Basile, V., Pelaccia, R., Surace, R., Oubellaouch, K., Modica, F., Orazi, L., Rotella, G., Filice, L., & Fassi, I. (2026). Thermal Transient Modelling and Experimental Validation of Hybrid Polymer-Steel Moulds for Micro-Injection Moulding. Defect and Diffusion Forum, 451, 157-167. https://doi.org/10.4028/p-rd7qdb

Vancouver

Zaniboni G, Basile V, Pelaccia R, Surace R, Oubellaouch K, Modica F, et al. Thermal Transient Modelling and Experimental Validation of Hybrid Polymer-Steel Moulds for Micro-Injection Moulding. Defect and Diffusion Forum. 2026;451:157-167. doi:10.4028/p-rd7qdb

BibTeX
@article{Zaniboni2026,
  author = {Zaniboni, Giulia and Basile, Vito and Pelaccia, Riccardo and Surace, Rossella and Oubellaouch, Keltoum and Modica, Francesco and Orazi, Leonardo and Rotella, Giovanna and Filice, Luigino and Fassi, Irene},
  title = {Thermal Transient Modelling and Experimental Validation of Hybrid Polymer-Steel Moulds for Micro-Injection Moulding},
  journal = {Defect and Diffusion Forum},
  year = {2026},
  volume = {451},
  pages = {157--167},
  doi = {10.4028/p-rd7qdb}
}
Kostenlos starten →