EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Characterisation of TRIP Effects of 31CrMoV9 for Hot Forming

Simon Peddinghaus, Norman Mohnfeld, Johanna Uhe, Bernd Arno Behrens

Materials Science Forum · 16.04.2026 · 1186 · 25-36

DOI: 10.4028/p-oanm4p ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 16.04.2026. Verfasst von Simon Peddinghaus und 3 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During the hot bulk forming of long parts, inhomogeneous distributions of deformations and temperatures occur. The gradients of these distributions lead to complex, overlaying residual stresses, which can cause critical geometric deviations and mechanical failures. Common finite element (FE)-simulations for designing a process are in principle capable to predict the thermal, mechanical and metallurgical effects, but require extended material models. Thereby, the total strain increment can be described through the partial strain components of the elastic, plastic, thermal transformation related and transformation plasticity strain. To allow the numerical prediction of the distortion of long hot formed parts, an experimental characterisation of the TRIP and backflow effects is presented for the steel 31CrMoV9. Time temperature transformation (TTT) and continuous cooling transformation (CCT) diagrams are determined with JMatPro and verified by means ofmicrostructure analysis and hardness measurements. Based on these diagrams, the transformation plasticity is investigated through dilatometric tests whereby tensile and compressive loads are applied during the phase transformation. The martensite phase transformation showed the highest amounts of TRIP strains, whilst the bainite transformation exhibited lower strains but a high tensile backflow strain. For perlite the beginning of the phase transformation was delayed and its duration extended due to the induced loads.

Zitieren

APA

Peddinghaus, S., Mohnfeld, N., Uhe, J., & Behrens, B. A. (2026). Experimental Characterisation of TRIP Effects of 31CrMoV9 for Hot Forming. Materials Science Forum, 1186, 25-36. https://doi.org/10.4028/p-oanm4p

Vancouver

Peddinghaus S, Mohnfeld N, Uhe J, Behrens BA. Experimental Characterisation of TRIP Effects of 31CrMoV9 for Hot Forming. Materials Science Forum. 2026;1186:25-36. doi:10.4028/p-oanm4p

BibTeX
@article{Peddinghaus2026,
  author = {Peddinghaus, Simon and Mohnfeld, Norman and Uhe, Johanna and Behrens, Bernd Arno},
  title = {Experimental Characterisation of TRIP Effects of 31CrMoV9 for Hot Forming},
  journal = {Materials Science Forum},
  year = {2026},
  volume = {1186},
  pages = {25--36},
  doi = {10.4028/p-oanm4p}
}
Kostenlos starten →