EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterisation and modelling of the damage and delamination behaviour of oxide scale layers in hot bulk forming

Simon Peddinghaus, Norman Mohnfeld, Hendrik Wester, Tim Bergelt, Marcel Graf, Johanna Uhe, Thomas Lampke, Bernd-Arno Behrens

International Journal of Material Forming · 2026-06 · 19 (2)

DOI: 10.1007/s12289-026-02017-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Material Forming, online erschienen am 11.05.2026. Verfasst von Simon Peddinghaus und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gottfried Wilhelm Leibniz Universität Hannover.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In hot forming processes of steel, oxide scale layers are formed in dependence of the occurring process conditions. As remaining oxide scale can weaken the formed workpiece, it has to be removed at the end of the process. Through this, the oxide scale formation can lead to a mass loss of up to 3% in addition to influencing the forming process for example by affecting the friction conditions or increasing the die wear. However, oxide scale layers can protect against further oxidation and limit the mass loss as long as they are not damaged or separated from the workpiece, for example through cracks or delamination. In order to evaluate the resulting forming process in dependence of the oxide scale layer, numerical simulations can be applied. For a precise numerical description of a forming process using a finite element simulation, it is necessary to model the delamination and damage behaviour of the oxide layer. This paper presents a characterisation and modelling approach to describe the delamination and damage behaviour based on the occurring stresses in dependence of the temperature. The results of the experimental study indicate that the investigated oxide scale layers were more sensitive towards delamination than crack initiation. The derived models allowed to numerically recreate the experimental tests.

Förderung

  • Gottfried Wilhelm Leibniz Universität Hannover

Zitieren

APA

Peddinghaus, S., Mohnfeld, N., Wester, H., Bergelt, T., Graf, M., Uhe, J., Lampke, T., & Behrens, B. (2026). Characterisation and modelling of the damage and delamination behaviour of oxide scale layers in hot bulk forming. International Journal of Material Forming, 19(2). https://doi.org/10.1007/s12289-026-02017-7

Vancouver

Peddinghaus S, Mohnfeld N, Wester H, Bergelt T, Graf M, Uhe J, et al. Characterisation and modelling of the damage and delamination behaviour of oxide scale layers in hot bulk forming. International Journal of Material Forming. 2026;19(2). doi:10.1007/s12289-026-02017-7

BibTeX
@article{Peddinghaus2026,
  author = {Peddinghaus, Simon and Mohnfeld, Norman and Wester, Hendrik and Bergelt, Tim and Graf, Marcel and Uhe, Johanna and Lampke, Thomas and Behrens, Bernd-Arno},
  title = {Characterisation and modelling of the damage and delamination behaviour of oxide scale layers in hot bulk forming},
  journal = {International Journal of Material Forming},
  year = {2026},
  volume = {19},
  number = {2},
  doi = {10.1007/s12289-026-02017-7}
}
Kostenlos starten →