Hybrid Numerical and Data-Driven Modelling for Defect Prediction in Screw Press Hot Bulk Forging of the En AW-6060 Part
Key Engineering Materials · 15.04.2026 · 1049 · 75-87
DOI: 10.4028/p-nz4icc ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 15.04.2026. Verfasst von Artem Alimov und 3 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Numerical simulation, particularly through the Finite Element Method (FEM), is widely applied in the design and optimization of metal forming processes. However, certain real-process effects are not fully captured by numerical models alone, creating a need for complementary data-driven approaches. This study presents a hybrid modelling framework that integrates FEM simulations with machine-data-based predictive modelling to improve defect prediction in hot forging. Experimental data were collected from automated forging trials on an SMS SPPE 6.3 screw press equipped with position, force, strain, acceleration, and frame-deflection sensors. A series of trials with varied process parameters enabled the development of a data-driven classification model for detecting the “underfilling” defect. In parallel, the FEM model was refined by incorporating additional real-process phenomena, including ram tilt, press-frame deflection, and air entrapment in die cavities. The combined approach significantly enhanced defect prediction accuracy and provided deeper insight into the mechanisms driving defect formation. These results demonstrate the effectiveness of hybrid numerical–data-driven modelling for improving the robustness of metal forming process design.
Zitieren
APA
Alimov, A., Jiang, Y., Gardill, M., & Härtel, S. (2026). Hybrid Numerical and Data-Driven Modelling for Defect Prediction in Screw Press Hot Bulk Forging of the En AW-6060 Part. Key Engineering Materials, 1049, 75-87. https://doi.org/10.4028/p-nz4icc
Vancouver
Alimov A, Jiang Y, Gardill M, Härtel S. Hybrid Numerical and Data-Driven Modelling for Defect Prediction in Screw Press Hot Bulk Forging of the En AW-6060 Part. Key Engineering Materials. 2026;1049:75-87. doi:10.4028/p-nz4icc
BibTeX
@article{Alimov2026,
author = {Alimov, Artem and Jiang, Yuyao and Gardill, Markus and Härtel, Sebastian},
title = {Hybrid Numerical and Data-Driven Modelling for Defect Prediction in Screw Press Hot Bulk Forging of the En AW-6060 Part},
journal = {Key Engineering Materials},
year = {2026},
volume = {1049},
pages = {75--87},
doi = {10.4028/p-nz4icc}
}
EUVIMED