EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploiting Adiabatic Softening for Defect-Free Hot Forging of Ti-6Al-4V Femoral Stems

Víctor Tuninetti iD, Josué Castro, Rodrigo Valle iD, César Garrido iD, Angelo Oñate iD

Journal of Functional Biomaterials · 12.06.2026 · 17 (6) · 292

DOI: 10.3390/jfb17060292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 12.06.2026. Verfasst von Víctor Tuninetti und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Universidad de La Frontera, Temuco 4811230, Chile. Die Arbeit nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Nacional de Investigación y Desarrollo, ANID/CONICYT, Universidad de La Frontera.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hot forging of Ti-6Al-4V is extensively utilized in the manufacture of orthopedic implants; however, the coupled influence of strain rate and temperature on ductile damage evolution during the forging of femoral stems remains insufficiently quantified. In this study, a finite element framework is developed to analyze and optimize the hot forging process, incorporating strain rate- and temperature-dependent plasticity, as well as the Johnson–Cook damage criterion. Mesh convergence is established, and the assumption of quasi-adiabatic conditions is substantiated via Péclet number analysis. A full factorial design is implemented by varying the ram velocity (0.1–0.5 m/s) and initial billet temperature (850–950 °C) to evaluate the forging load, stress triaxiality, equivalent plastic strain, and damage accumulation. Results indicate that process kinetics govern the mechanical response: increasing the ram velocity enhances strain-rate hardening, resulting in higher peak loads, while explicitly reducing stress triaxiality and suppressing ductile damage evolution. Conversely, temperature exhibits a secondary influence within the investigated domain. Validation of the damage criterion confirms safe operating windows, identifying low-velocity forging as a high-risk condition for localized defect formation. These findings provide practical guidelines for the strain-rate-based optimization of thermomechanical processing parameters for Ti-6Al-4V femoral stems.

Schlagwörter

Stichwörter der Autor:innen

Ti-6Al-4Vbiomedical implantdamage modelingfemoral implantfinite element analysishot forginghot formingprocesses optimization

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Universidad de La Frontera, Temuco 4811230, Chile.
  • Construction Multidisciplinary Research Group, Facultad de Arquitectura, Construcción y Medio Ambiente, Universidad Autónoma de Chile, Talca 3460000, Chile.
  • Department of Mechanical Engineering, Universidad del Bío-Bío, Concepción 4081112, Chile.
  • Department of Materials Engineering (DIMAT), Faculty of Engineering, Universidad de Concepción, Concepción 4070138, Chile.

ORCID-Profile: Víctor Tuninetti, Rodrigo Valle, César Garrido, Angelo Oñate

Förderung

  • Agencia Nacional de Investigación y Desarrollo
  • ANID/CONICYT
  • Universidad de La Frontera

Zitieren

APA

Tuninetti, V., Castro, J., Valle, R., Garrido, C., & Oñate, A. (2026). Exploiting Adiabatic Softening for Defect-Free Hot Forging of Ti-6Al-4V Femoral Stems. Journal of Functional Biomaterials, 17(6), 292. https://doi.org/10.3390/jfb17060292

Vancouver

Tuninetti V, Castro J, Valle R, Garrido C, Oñate A. Exploiting Adiabatic Softening for Defect-Free Hot Forging of Ti-6Al-4V Femoral Stems. Journal of Functional Biomaterials. 2026;17(6):292. doi:10.3390/jfb17060292

BibTeX
@article{Tuninetti2026,
  author = {Tuninetti, Víctor and Castro, Josué and Valle, Rodrigo and Garrido, César and Oñate, Angelo},
  title = {Exploiting Adiabatic Softening for Defect-Free Hot Forging of Ti-6Al-4V Femoral Stems},
  journal = {Journal of Functional Biomaterials},
  year = {2026},
  volume = {17},
  number = {6},
  pages = {292},
  doi = {10.3390/jfb17060292}
}
Kostenlos starten →