EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic modelling and efficiency prediction for forging operations under a screw press

Heyu Song, Camille Durand, Cyrille Baudouin, Régis Bigot

The International Journal of Advanced Manufacturing Technology · 2024-09 · 134 (1-2) · 645-656

DOI: 10.1007/s00170-024-14145-y ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 24.07.2024. Verfasst von Heyu Song und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council, Arts et Metiers Institute of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate predictions concerning a forging process can be obtained by numerical simulation, but only with a thorough knowledge of the main process variables. The material flow behavior and the interface effects are already well studied in the literature, but not the machine behavior, although it is required to estimate blow efficiency and deduce the energy actually transmitted to the workpiece. In this paper, an experimental methodology was applied to determine a spring-mass-damping model and its associated parameters for a screw press. The model and its parameters were identified with press strikes performed without billet. For validation, simulations were performed to predict blows on copper billets. The model’s predictions were in good agreement with the experimental measurements for ten consecutive blows on a copper billet. The decrease of process efficiency and the evolution from inelastic blows to elastic blows were correctly depicted by the model.

Förderung

  • China Scholarship Council
  • Arts et Metiers Institute of Technology

Zitieren

APA

Song, H., Durand, C., Baudouin, C., & Bigot, R. (2024). Dynamic modelling and efficiency prediction for forging operations under a screw press. The International Journal of Advanced Manufacturing Technology, 134(1-2), 645-656. https://doi.org/10.1007/s00170-024-14145-y

Vancouver

Song H, Durand C, Baudouin C, Bigot R. Dynamic modelling and efficiency prediction for forging operations under a screw press. The International Journal of Advanced Manufacturing Technology. 2024;134(1-2):645-656. doi:10.1007/s00170-024-14145-y

BibTeX
@article{Song2024,
  author = {Song, Heyu and Durand, Camille and Baudouin, Cyrille and Bigot, Régis},
  title = {Dynamic modelling and efficiency prediction for forging operations under a screw press},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {134},
  number = {1-2},
  pages = {645--656},
  doi = {10.1007/s00170-024-14145-y}
}
Kostenlos starten →