EUVIMEDEUVIMED entdecken
Crossref

Statistical Response Surface Modeling of Tensile Strength and Moisture Diffusion in Hygrothermally Aged Jute Fiber Composites

Pawan Kumar

Key Engineering Materials · 13.11.2026 · 1064 · 109-122

DOI: 10.4028/p-nv467y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 13.11.2026. Verfasst von Pawan Kumar. Die Arbeit nennt 27 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The jute fiber-reinforced polymer composites were subjected to hot-pressing at temperatures of 60 °C, 80 °C, and 100 °C, followed by hygrothermal treatment for durations ranging from 0 to 64 hr. The statistical response surface modeling of tensile strength ( UTS ) and gain in weight, ΔW (%), was done using Minitab Statistical Software 22.4.0. The independent variables considered for UTS were hot-pressing temperature ( θ ) and treatment time ( t ). However, for the ΔW (%), it was the hot-pressing temperature ( θ ) and the square root of treatment time ( ẗ ). The maximum UTS was observed at the severity factor corresponding to moderate hot-pressing temperature and the smallest treatment time. However, the maximum ΔW (%) was observed at the lowest hot-pressing temperature and the largest square root of treatment time. The statistical modeling of UTS indicates that the effect was in the order of θ*θ > t > t*t > θ > θ*t . The contour lines indicated a significant interaction between independent variables. Moreover, the slope of the surface plot indicated that the treatment time was a more critical factor near the optimum, while the hot-pressing temperature had some tolerance. Furthermore, the statistical modeling of ΔW (%) indicates that the effect was in the order of ẗ > ẗ*ẗ > θ*θ > θ > ẗ* θ . The small curvature of contour lines indicated a non-significant interaction between independent variables. The hygrothermal conditions which provided the maximum UTS enable the matrix cracking, while the conditions for maximum ΔW (%) showed voids and swelling.

Zitieren

APA

Kumar, P. (2026). Statistical Response Surface Modeling of Tensile Strength and Moisture Diffusion in Hygrothermally Aged Jute Fiber Composites. Key Engineering Materials, 1064, 109-122. https://doi.org/10.4028/p-nv467y

Vancouver

Kumar P. Statistical Response Surface Modeling of Tensile Strength and Moisture Diffusion in Hygrothermally Aged Jute Fiber Composites. Key Engineering Materials. 2026;1064:109-122. doi:10.4028/p-nv467y

BibTeX
@article{Kumar2026,
  author = {Kumar, Pawan},
  title = {Statistical Response Surface Modeling of Tensile Strength and Moisture Diffusion in Hygrothermally Aged Jute Fiber Composites},
  journal = {Key Engineering Materials},
  year = {2026},
  volume = {1064},
  pages = {109--122},
  doi = {10.4028/p-nv467y}
}
Kostenlos starten →