EUVIMEDEUVIMED entdecken
Crossref

Statistical Modeling of the Drop Strength of Cotton Fiber-Reinforced Paper Composites Using Response Surface Methodology

Mamookho Elizabeth Makhatha, Pawan Kumar

Key Engineering Materials · 13.11.2026 · 1064 · 97-108

DOI: 10.4028/p-l994n7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 13.11.2026. Verfasst von Mamookho Elizabeth Makhatha und 1 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

. In the present work, a statistical model for the height to failure of cotton fiber-reinforced paper composites subjected to MIL-STD-810G 516.6 drop tests was developed using response surface methodology. The independent variables considered were the density ( ρ ) and alkali treatment time ( t ). The Minitab 22.1.0. statistical software was used for modeling and both linear and non-linear effects were considered. The effect of treatment time was mostly insignificant at the lower densities. However, the effect of variables on the response was in the order of ρ 2 > ρ > t 2 > t . The lowest response (height to failure) was observed in the low-density region (< 0.10 g/cm³), likely due to insufficient material available to accommodate the stress. However, the maximum response was observed at the extended alkali treatment time (4.5 hr. < t < 6.3 hr.) and higher fiber density (0.25 g/cm 3 < ρ < 0.27 g/cm 3 ). The density dominated over the treatment time for the response output. Furthermore, increasing treatment time enhances the response up to a certain point. Once the optimum response was achieved, the response began to decrease slightly with further increases in either density or treatment time. The misalignment and failure of the reinforcement, followed by matrix fracture, were the primary failure mechanisms for composites under the drop test.

Zitieren

APA

Makhatha, M. E., & Kumar, P. (2026). Statistical Modeling of the Drop Strength of Cotton Fiber-Reinforced Paper Composites Using Response Surface Methodology. Key Engineering Materials, 1064, 97-108. https://doi.org/10.4028/p-l994n7

Vancouver

Makhatha ME, Kumar P. Statistical Modeling of the Drop Strength of Cotton Fiber-Reinforced Paper Composites Using Response Surface Methodology. Key Engineering Materials. 2026;1064:97-108. doi:10.4028/p-l994n7

BibTeX
@article{Makhatha2026,
  author = {Makhatha, Mamookho Elizabeth and Kumar, Pawan},
  title = {Statistical Modeling of the Drop Strength of Cotton Fiber-Reinforced Paper Composites Using Response Surface Methodology},
  journal = {Key Engineering Materials},
  year = {2026},
  volume = {1064},
  pages = {97--108},
  doi = {10.4028/p-l994n7}
}
Kostenlos starten →