Mechanical properties and moisture diffusion in hot-pressed jute fiber composite subjected to hygrothermal ageing
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2025-10 · 239 (5) · 2582-2589
DOI: 10.1177/09544089231215205 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 27.11.2023. Verfasst von Pawan Kumar und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben.
Abstract (Originalsprache)
Jute fiber is one of the most extensively used eco-friendly natural fibers that are hydrophilic. The performance of natural fiber-reinforced composites is affected by the diffusion of heat and moisture from the environment in addition to the exposure time. In the present investigation, the ultimate tensile strength, displacement at fracture, and energy at yield of the jute fiber-reinforced composite under different hygrothermal (temperature and relative humidity) conditions are investigated. The samples were prepared by hand lay-up technique and the laminates were hot pressed on a hydraulic press apparatus. The specimens were further exposed to a hygrothermal environment using a humidity cabinet (with an inbuilt thermometer and hygrometer) for varied intervals of time of 4, 16, and 64 h. The longitudinal tensile stress ( σ ) increased at lower hot-pressing temperatures and minimum hygrothermal ageing and it decreased at a higher temperature. Upon increase in hygrothermal ageing, σ decreased at all temperatures. The energy at yield point ( E ) decreased significantly at lower temperatures and minimum hygrothermal ageing while minimum changes were observed at a higher hot-pressing temperature. The diffusion of moisture as a function of time and temperature explained using Fickian law. The initial region showed nearly linear variation. With continuous hygrothermal ageing, the equilibrium, considering partial pressure, was achieved between the environment and moisture inside the sample. The microstructure of the sample processed at lower hot-pressing temperatures followed by hygrothermal ageing of 16 h showed diffusion and fiber pull-out. However, at a higher temperature, matrix cracking was also observed.
Zitieren
APA
Kumar, P., Makhatha, M. E., M, V. H., Hiremath, S., & Verma, B. B. (2025). Mechanical properties and moisture diffusion in hot-pressed jute fiber composite subjected to hygrothermal ageing. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 239(5), 2582-2589. https://doi.org/10.1177/09544089231215205
Vancouver
Kumar P, Makhatha ME, M VH, Hiremath S, Verma BB. Mechanical properties and moisture diffusion in hot-pressed jute fiber composite subjected to hygrothermal ageing. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2025;239(5):2582-2589. doi:10.1177/09544089231215205
BibTeX
@article{Kumar2025,
author = {Kumar, Pawan and Makhatha, Mamookho Elizabeth and M, Vishwanatha H and Hiremath, Shivashankar and Verma, Bipin Bihari},
title = {Mechanical properties and moisture diffusion in hot-pressed jute fiber composite subjected to hygrothermal ageing},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2025},
volume = {239},
number = {5},
pages = {2582--2589},
doi = {10.1177/09544089231215205}
}
EUVIMED