Classification of Cutting Tool Wear Evolution in CNC Turning Using Convolutional Neural Networks
Defect and Diffusion Forum · 15.04.2026 · 450 · 119-126
DOI: 10.4028/p-ni0kla ↗Kurz gefasst
Fachartikel in der Zeitschrift Defect and Diffusion Forum, online erschienen am 15.04.2026. Verfasst von Dimitrios Apollon Gartzonikas und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study proposes an automated framework for online cutting tool wear classification in CNC turning using low-cost optical equipment and Convolutional Neural Networks (CNNs). Longitudinal turning experiments were performed on CK45 medium carbon steel using a HAAS TL1 lathe under dry machining conditions. Tool wear evolution was monitored via a lathe-mounted digital microscope, with images classified into three distinct stages: Low (Vb200 μm). A shallow CNN architecture, consisting of three convolutional blocks and a Softmax output layer, was developed to balance model complexity with computational efficiency for potential edge deployment. To enhance robustness against positional changes, data augmentation techniques including random translations and rotations were applied. The results demonstrate good performance, with the model achieving 94.7% accuracy and a weighted F1-score of 95.4% on the testing subset. While the model showed exceptional performance in identifying Low and Medium wear, data scarcity in the Critical wear class remained a limiting factor for recall. Overall, the study confirms that shallow CNNs can accurately capture spatial hierarchies for image-based wear assessment.
Zitieren
APA
Gartzonikas, D. A., Karkalos, N. E., Markopoulos, A. P., & Benardos, P. (2026). Classification of Cutting Tool Wear Evolution in CNC Turning Using Convolutional Neural Networks. Defect and Diffusion Forum, 450, 119-126. https://doi.org/10.4028/p-ni0kla
Vancouver
Gartzonikas DA, Karkalos NE, Markopoulos AP, Benardos P. Classification of Cutting Tool Wear Evolution in CNC Turning Using Convolutional Neural Networks. Defect and Diffusion Forum. 2026;450:119-126. doi:10.4028/p-ni0kla
BibTeX
@article{Gartzonikas2026,
author = {Gartzonikas, Dimitrios Apollon and Karkalos, Nikolaos E. and Markopoulos, Angelos P. and Benardos, Panorios},
title = {Classification of Cutting Tool Wear Evolution in CNC Turning Using Convolutional Neural Networks},
journal = {Defect and Diffusion Forum},
year = {2026},
volume = {450},
pages = {119--126},
doi = {10.4028/p-ni0kla}
}
EUVIMED