EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Optimization of Injection-Molded Components for Defect Reduction and Warpage Minimization

Keltoum Oubellaouch, Riccardo Pelaccia, Giulia Zaniboni, Vincenzina Siciliani, Barbara Reggiani

Defect and Diffusion Forum · 17.04.2026 · 451 · 133-146

DOI: 10.4028/p-jeno27 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Defect and Diffusion Forum, online erschienen am 17.04.2026. Verfasst von Keltoum Oubellaouch und 4 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Warpage in injection-molded thin-walled box-shaped parts is primarily caused by non-uniform cooling and differential shrinkage. This study proposes a two-step, multi-objective optimization strategy to reduce part warpage by addressing both thermal and geometric factors. In the first step, the mold cooling system is optimized through a bi-objective formulation that simultaneously minimizes (i) the temperature standard deviation within the part and (ii) the total cooling channel length. The optimization is carried out using a coupled workflow involving parametric CAD modeling, Autodesk Moldflow simulations, and a genetic algorithm. The optimized cooling design reduces temperature non-uniformity by 44% compared to a conventional cooling layout. In the second step, a geometric optimization is performed through the addition of a reinforcing border, where maximum deflection and total part volume are minimized simultaneously. The combined optimization leads to a reduction in maximum warpage from 14.5 mm in the reference configuration to 2.06 mm in the final design. The results demonstrate the effectiveness of a sequential optimization approach in achieving significant warpage reduction while maintaining material and manufacturing efficiency.

Zitieren

APA

Oubellaouch, K., Pelaccia, R., Zaniboni, G., Siciliani, V., & Reggiani, B. (2026). Multi-Objective Optimization of Injection-Molded Components for Defect Reduction and Warpage Minimization. Defect and Diffusion Forum, 451, 133-146. https://doi.org/10.4028/p-jeno27

Vancouver

Oubellaouch K, Pelaccia R, Zaniboni G, Siciliani V, Reggiani B. Multi-Objective Optimization of Injection-Molded Components for Defect Reduction and Warpage Minimization. Defect and Diffusion Forum. 2026;451:133-146. doi:10.4028/p-jeno27

BibTeX
@article{Oubellaouch2026,
  author = {Oubellaouch, Keltoum and Pelaccia, Riccardo and Zaniboni, Giulia and Siciliani, Vincenzina and Reggiani, Barbara},
  title = {Multi-Objective Optimization of Injection-Molded Components for Defect Reduction and Warpage Minimization},
  journal = {Defect and Diffusion Forum},
  year = {2026},
  volume = {451},
  pages = {133--146},
  doi = {10.4028/p-jeno27}
}
Kostenlos starten →