Rotational Speed and Torque of Axial-Flux Motor Using Sintered Iron Nano-Polycrystalline Body
Journal of Nano Research · 18.03.2026 · 91 · 133-148
DOI: 10.4028/p-bta0fi ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Nano Research, online erschienen am 18.03.2026. Verfasst von Hiroto Koyakata und 3 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben.
Abstract (Originalsprache)
An axial-flux motor using sintered iron (Fe) nano-polycrystalline body has been developed at the first time. In this study, its mechanical properties such as rotational speed, torque, and output power properties were compared with those of axial-flux motors using soft iron cores. Experimental results showed that the maximum rotational speed of the axial-flux motor using sintered Fe nano-polycrystalline was 8000 rpm with load, double that of the axial-flux motors using a soft iron core. The torques of both types of motors were around 0.01Nm with a little difference, and the axial-flux motor using sintered Fe nano-polycrystalline had double the output power while keeping torque the same. Sintered Fe nano-polycrystalline has significantly higher magnetic permeability than common iron materials. The material has lower magnetic saturation flux density. Fe nanoparticles were produced from iron oxide particles by using high-repetition laser pulse in liquid. Core inductors with this material were fabricated. Measurements of the core inductor magnetization clarified that the specific permeability of the sintered Fe nano-polycrystalline was 1 million, much higher than the 1000-2000 of soft iron.
Zitieren
APA
Koyakata, H., Osawa, H., Saiki, T., & Inada, M. (2026). Rotational Speed and Torque of Axial-Flux Motor Using Sintered Iron Nano-Polycrystalline Body. Journal of Nano Research, 91, 133-148. https://doi.org/10.4028/p-bta0fi
Vancouver
Koyakata H, Osawa H, Saiki T, Inada M. Rotational Speed and Torque of Axial-Flux Motor Using Sintered Iron Nano-Polycrystalline Body. Journal of Nano Research. 2026;91:133-148. doi:10.4028/p-bta0fi
BibTeX
@article{Koyakata2026,
author = {Koyakata, Hiroto and Osawa, Hodaka and Saiki, Taku and Inada, Mitsuru},
title = {Rotational Speed and Torque of Axial-Flux Motor Using Sintered Iron Nano-Polycrystalline Body},
journal = {Journal of Nano Research},
year = {2026},
volume = {91},
pages = {133--148},
doi = {10.4028/p-bta0fi}
}
EUVIMED