High-Torque-Density Composite-Cooled Axial Flux Electrically Excited Synchronous Motor
Energies · 29.08.2025 · 18 (17) · 4585
DOI: 10.3390/en18174585 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 29.08.2025. Verfasst von Shumei Cui und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Axial flux motors, characterized by compact axial dimensions and high torque density, are well-suited for space-constrained applications such as in-wheel drives and flying vehicles. However, conventional axial flux permanent magnet synchronous motors (AFPMSMs) face challenges such as high-temperature demagnetization, reduced efficiency at high speeds, and elevated manufacturing costs. Electrically excited synchronous motors (EESMs) offer a promising alternative, providing high-temperature reliability and superior high-speed capability while maintaining high torque density. In this paper, a novel composite-cooled axial flux electrically excited synchronous motor (AFEESM) is proposed. From an electromagnetic design perspective, the effects of key parameters such as shaft-to-outer-diameter ratio, inner-to-outer-diameter ratio, slot depth, and yoke thickness on output performance are systematically investigated, and a dedicated design procedure is established. Through multi-objective optimization, the motor’s torque output is increased by 19.6%. Comparative simulations are conducted to evaluate differences in torque density, efficiency, and cost between the proposed AFEESM, a conventional radial flux EESM, and an AFPMSM. To address the cooling requirements of double-sided windings on both the stator and rotor, a dual-channel composite cooling structure is developed, integrating internal–external double-loop water cooling for the stator and axial through-hole air cooling for the rotor, reducing the peak temperature by over 36%. Finally, a prototype is manufactured, and no-load characteristics and load efficiency validate the effectiveness of the electromagnetic design and the structural reliability of the motor.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Cui, S., Zhang, Y., Song, B., Xu, K., Feng, C., & Qi, S. (2025). High-Torque-Density Composite-Cooled Axial Flux Electrically Excited Synchronous Motor. Energies, 18(17), 4585. https://doi.org/10.3390/en18174585
Vancouver
Cui S, Zhang Y, Song B, Xu K, Feng C, Qi S. High-Torque-Density Composite-Cooled Axial Flux Electrically Excited Synchronous Motor. Energies. 2025;18(17):4585. doi:10.3390/en18174585
BibTeX
@article{Cui2025,
author = {Cui, Shumei and Zhang, Yuqi and Song, Beibei and Xu, Kexin and Feng, Can and Qi, Shaoshuan},
title = {High-Torque-Density Composite-Cooled Axial Flux Electrically Excited Synchronous Motor},
journal = {Energies},
year = {2025},
volume = {18},
number = {17},
pages = {4585},
doi = {10.3390/en18174585}
}
EUVIMED