EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Design, Analysis, and Verification of an Axial Flux Permanent Magnet Motor with High Torque Density

Dapeng Quan, Caiting He, Chenyuan Li, Zeming Zhao, Xiaoze Yang, Limei Ma, Mingyang Li, Yong Zhao, Hongtao Wu

Applied Sciences · 18.03.2025 · 15 (6) · 3327

DOI: 10.3390/app15063327 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.03.2025. Verfasst von Dapeng Quan und 8 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundation of Chinese State Key Laboratory of Robotics and Systems, Foundation of National Key Laboratory of Aerospace Mechanism, China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming at the defects of long axial size and low torque density of the existing radial flux permanent magnet motor, this paper proposes an axial flux permanent magnet synchronous motor (AFPMM) with a double-stator and single-rotor structure based on the design requirements of the motor for mechanical dogs’ electric drive joints. The finite element method is employed to evaluate the static magnetic field, load characteristics, and associated losses. The analysis indicates that the average magnetic flux density in the air gap reaches approximately 0.95 T, with a rated torque of around 2.72 N.m, a peak torque of 7.6 N.m, and an efficiency of approximately 87.73%. The electromagnetic torque model is developed using the Maxwell tensor method, allowing for the effects of critical structural parameters on torque to be investigated. By optimizing the design for torque density, an improvement of nearly 20% is achieved. A prototype was fabricated and tested, demonstrating good agreement between simulation and experimental results. This research introduces a novel approach for designing axial flux motors with high torque and power densities.

Förderung

  • Foundation of Chinese State Key Laboratory of Robotics and Systems
  • Foundation of National Key Laboratory of Aerospace Mechanism, China
  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation
  • Natural Science Foundation of Heilongjiang Province, China

Zitieren

APA

Quan, D., He, C., Li, C., Zhao, Z., Yang, X., Ma, L., Li, M., Zhao, Y., & Wu, H. (2025). The Design, Analysis, and Verification of an Axial Flux Permanent Magnet Motor with High Torque Density. Applied Sciences, 15(6), 3327. https://doi.org/10.3390/app15063327

Vancouver

Quan D, He C, Li C, Zhao Z, Yang X, Ma L, et al. The Design, Analysis, and Verification of an Axial Flux Permanent Magnet Motor with High Torque Density. Applied Sciences. 2025;15(6):3327. doi:10.3390/app15063327

BibTeX
@article{Quan2025,
  author = {Quan, Dapeng and He, Caiting and Li, Chenyuan and Zhao, Zeming and Yang, Xiaoze and Ma, Limei and Li, Mingyang and Zhao, Yong and Wu, Hongtao},
  title = {The Design, Analysis, and Verification of an Axial Flux Permanent Magnet Motor with High Torque Density},
  journal = {Applied Sciences},
  year = {2025},
  volume = {15},
  number = {6},
  pages = {3327},
  doi = {10.3390/app15063327}
}
Kostenlos starten →