EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion resistance of cobalt-chromium alloys for metal ceramic dental restorations

Zlatina Tomova iD

Folia Medica · 2025

DOI: 10.3897/folmed.67.e150425 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Folia Medica, 2025. Verfasst von Zlatina Tomova. Beteiligte Einrichtung: Medical University of Plovdiv, Plovdiv, Bulgaria. Hauptthemen laut MEDLINE: Chromium Alloys, Metal Ceramic Alloys, Cobalt. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

The corrosion of dental alloys can have undesirable consequences. The corrosion properties may be modified by the alloy production method, composition, method of prosthetic restoration manufacturing, and oral conditions.

Aim

The aim of this study was to assess the corrosion resistance of three cobalt-based alloys produced by different methods and indicated for different manufacturing techniques. Materials and methods : Three groups of specimens were created. Group 1 consisted of 35 specimens produced using direct metal laser sintering (DMLS) with EOS CobaltChrome SP2 (EOS, Germany). Groups 2 and 3 each consisted of 30 specimens produced by a conventional casting technique using Marranium CC (Sintal, Bulgaria) and Wirobond C (Bego, Germany). The former was obtained by powder metallurgy methods, while the latter was obtained by conventional thermal melting and alloying. The specimens were placed in artificial saliva with pH adjusted to 7.4. Open circuit potentials were measured at two time points: two hours and seven days after placement in the medium, using a Dentotest Six apparatus (Atlantis, Bulgaria).

Results

After two hours in artificial saliva, significant differences in the open circuit potential (Eocp) values were observed between the groups. However, after seven days, no significant differences in Eocp were observed.

Conclusion

Corrosion behavior of cobalt-based dental alloys depends on the type of the alloy and the manufacturing methods.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Chromium AlloysMetal Ceramic AlloysCobaltCorrosionHumans

Stichwörter der Autor:innen

corrosion powder metallurgy 3D printing

Substanzen

Chromium AlloysMetal Ceramic AlloysCobalt

Autor:innen und Institutionen

  • Medical University of Plovdiv, Plovdiv, Bulgaria.

ORCID-Profile: Zlatina Tomova

Zitieren

APA

Tomova, Z. (2025). Corrosion resistance of cobalt-chromium alloys for metal ceramic dental restorations. Folia Medica. https://doi.org/10.3897/folmed.67.e150425

Vancouver

Tomova Z. Corrosion resistance of cobalt-chromium alloys for metal ceramic dental restorations. Folia Medica. 2025. doi:10.3897/folmed.67.e150425

BibTeX
@article{Tomova2025,
  author = {Tomova, Zlatina},
  title = {Corrosion resistance of cobalt-chromium alloys for metal ceramic dental restorations},
  journal = {Folia Medica},
  year = {2025},
  doi = {10.3897/folmed.67.e150425}
}
Kostenlos starten →