Rheological and Morphological Practical Investigation on Creep Properties of Carbon Fiber Composites Supported with Silicon Carbide
Journal of Advanced Research in Applied Mechanics · 10.07.2025 · 139 (1) · 87-97
DOI: 10.37934/aram.139.1.8797 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Advanced Research in Applied Mechanics, online erschienen am 10.07.2025. Verfasst von Alaa Kadhim Mohammed und 5 weiteren Autor:innen.
Abstract (Originalsprache)
This research paper is focusing on rheological and morphological examinations of a modified composite material which the original one is carbon fiber composite and denoted as (D), meanwhile, the second one named treated composite and denoted as (T) and this composite is composed of a specified mixture of carbon fiber, epoxy resin, hardener, and silicon carbide as a nano material with already stated weight based mixing ratio, where the added amount of this additive material is 10%wt. Creep strain test has been repeated two times for both datum and treated composites, therefore final experimental results and analysis showed that the obtained creep strain for the datum composite for the first and second attempts are 0.195% and 0.197% respectively, i.e. the mean value is 0.196%, but in case of treated composite they are 0.174% and 0.173% respectively with average value of 0.1735%, so the gained creep strain decrement are -12% and -13.8% in the first and second trials respectively with mathematical mean value of -12.9% which mean improvement for the rheological properties of the treated composite after adding this nano materials, so the treated composite has become resist creep permanent deformation due to applied loads, on the other hand, morphological examination revealed that there is an accepted mutual interaction between the datum composite with the silicon carbide as an additive materials and the produced composite has homogeneous structure with free of flaws, local defect or longitudinal grooves, so this is considered as consolidating for overall properties for the treated composite.
Zitieren
APA
Mohammed, A. K., Khudhair, W. A., Mohsin, M. T., Hussein, E. K., Santos, T., & Santos, C. (2025). Rheological and Morphological Practical Investigation on Creep Properties of Carbon Fiber Composites Supported with Silicon Carbide. Journal of Advanced Research in Applied Mechanics, 139(1), 87-97. https://doi.org/10.37934/aram.139.1.8797
Vancouver
Mohammed AK, Khudhair WA, Mohsin MT, Hussein EK, Santos T, Santos C. Rheological and Morphological Practical Investigation on Creep Properties of Carbon Fiber Composites Supported with Silicon Carbide. Journal of Advanced Research in Applied Mechanics. 2025;139(1):87-97. doi:10.37934/aram.139.1.8797
BibTeX
@article{Mohammed2025,
author = {Mohammed, Alaa Kadhim and Khudhair, Waqar Abbas and Mohsin, Mushtaq Talib and Hussein, Emad Kamil and Santos, Thiago and Santos, Caroliny},
title = {Rheological and Morphological Practical Investigation on Creep Properties of Carbon Fiber Composites Supported with Silicon Carbide},
journal = {Journal of Advanced Research in Applied Mechanics},
year = {2025},
volume = {139},
number = {1},
pages = {87--97},
doi = {10.37934/aram.139.1.8797}
}
EUVIMED