EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Technological Considerations in WEDM of Carbon Fiber Reinforced Silicon Carbide Composites (Cf-SiC)

Dariusz Poroś, Hubert Skowronek

Manufacturing Technology · 21.12.2024 · 24 (6) · 940-951

DOI: 10.21062/mft.2024.103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Manufacturing Technology, erschienen am 21.12.2024. Verfasst von Dariusz Poroś und 1 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wire electrical discharge machining (WEDM) was employed to process thin-walled, multidirectional carbon fiber-reinforced silicon carbide (Cf-SiC) composites. This study investigates the effects of key WEDM parameters, including gap voltage (Vg), pulse on-time (Ton), pulse off-time (Toff), and wire electrode type on material removal rate (MRR) and surface roughness (SR). All experimental planning, data analysis, optimization, and result visualization were conducted using MATLAB software. Results indicate that using CuZn50-coated wire electrodes increases MRR by 11% compared to CuZn37 bare brass wire. Scanning electron microscopy (SEM) confirmed the inverse thermal expansion-based material removal mechanism, revealing surface defects such as fiber fractures, interfacial detachment, craters, and micro-cracks. Surface roughness, as indicated by 3D topographic measurements was found acceptable with an average Ra between 2 and 3 μm. Overall, WEDM proves effective for machining Cf-SiC, especially for complex geometries such as holes, grooves, keyways, and splines when appropriate electrodes and parameters are applied.

Zitieren

APA

Poroś, D., & Skowronek, H. (2024). Technological Considerations in WEDM of Carbon Fiber Reinforced Silicon Carbide Composites (Cf-SiC). Manufacturing Technology, 24(6), 940-951. https://doi.org/10.21062/mft.2024.103

Vancouver

Poroś D, Skowronek H. Technological Considerations in WEDM of Carbon Fiber Reinforced Silicon Carbide Composites (Cf-SiC). Manufacturing Technology. 2024;24(6):940-951. doi:10.21062/mft.2024.103

BibTeX
@article{Poro2024,
  author = {Poroś, Dariusz and Skowronek, Hubert},
  title = {Technological Considerations in WEDM of Carbon Fiber Reinforced Silicon Carbide Composites (Cf-SiC)},
  journal = {Manufacturing Technology},
  year = {2024},
  volume = {24},
  number = {6},
  pages = {940--951},
  doi = {10.21062/mft.2024.103}
}
Kostenlos starten →