EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additively Manufactured Carbon Fiber-Reinforced Siliconized Silicon Carbide Composites Using Carbon Fiber-Reinforced Poly-Ether-Ether-Ketone (PEEK) as a Precursor

Bola Yoon, James W. Klett, Ryan M. Paul, Michael J. Lance, Hsin Wang, Kashif Nawaz, Edgar Lara-Curzio

Ceramics · 07.06.2026 · 9 (6) · 60

DOI: 10.3390/ceramics9060060 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ceramics, online erschienen am 07.06.2026. Verfasst von Bola Yoon und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy, Building Technologies Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Herein, we report a method to additively manufacture carbon fiber-reinforced siliconized silicon carbide composites. The process involves the pyrolysis of a 3D-printed carbon fiber-reinforced poly-ether-ether-ketone (PEEK) composite to produce a porous carbon fiber-reinforced carbon matrix composite preform, which is subsequently infiltrated with molten silicon to obtain a carbon fiber-reinforced siliconized silicon carbide composite. A key aspect of the method is limiting polymer melt flow during pyrolysis of PEEK, which is achieved by thermally annealing the 3D-printed carbon fiber-reinforced PEEK preform in air at a temperature below PEEK’s melting temperature. Rheological and differential scanning calorimetry (DSC) measurements demonstrate that the thermal annealing treatment altered the melting behavior of PEEK, while NMR and FTIR measurements provided a mechanistic explanation for the structural changes responsible for the behavior. It was also found that dimensional changes during pyrolysis were anisotropic with greater shrinkage in the stacking direction of the material.

Förderung

  • U.S. Department of Energy, Building Technologies Program

Zitieren

APA

Yoon, B., Klett, J. W., Paul, R. M., Lance, M. J., Wang, H., Nawaz, K., & Lara-Curzio, E. (2026). Additively Manufactured Carbon Fiber-Reinforced Siliconized Silicon Carbide Composites Using Carbon Fiber-Reinforced Poly-Ether-Ether-Ketone (PEEK) as a Precursor. Ceramics, 9(6), 60. https://doi.org/10.3390/ceramics9060060

Vancouver

Yoon B, Klett JW, Paul RM, Lance MJ, Wang H, Nawaz K, et al. Additively Manufactured Carbon Fiber-Reinforced Siliconized Silicon Carbide Composites Using Carbon Fiber-Reinforced Poly-Ether-Ether-Ketone (PEEK) as a Precursor. Ceramics. 2026;9(6):60. doi:10.3390/ceramics9060060

BibTeX
@article{Yoon2026,
  author = {Yoon, Bola and Klett, James W. and Paul, Ryan M. and Lance, Michael J. and Wang, Hsin and Nawaz, Kashif and Lara-Curzio, Edgar},
  title = {Additively Manufactured Carbon Fiber-Reinforced Siliconized Silicon Carbide Composites Using Carbon Fiber-Reinforced Poly-Ether-Ether-Ketone (PEEK) as a Precursor},
  journal = {Ceramics},
  year = {2026},
  volume = {9},
  number = {6},
  pages = {60},
  doi = {10.3390/ceramics9060060}
}
Kostenlos starten →