Effects of Mechanical Methods Used in Peri-implantitis Treatment on Implant Surface Decontamination and Roughness
Journal of Visualized Experiments · 2025
DOI: 10.3791/67778 ↗At a glance
Video/Audio in Journal of Visualized Experiments, 2025. Written by Ipek Ozgu and 1 co-authors. Institution: Faculty of Dentistry, Department of Periodontology, Akdeniz University; ipekozgu@akdeniz.edu.tr. Major MEDLINE topics: Peri-Implantitis, Dental Implants, Decontamination, Air Abrasion, Dental. Cited 1 times so far (Crossref); 43 references.
Abstract (original language)
Various mechanical methods have been proposed for decontaminating dental implant surfaces with varying success. This in vitro study evaluated the decontamination efficiency of an air abrasion (AA) system with erythritol powder, a polyether-ether-ketone (PEEK) ultrasonic tip, and titanium curettes (TIT) and their effects on implant surface topography using scanning electron microscopy (SEM). A total of 60 implants were stained with permanent red ink and placed in 3D-printed Class 1A and Class 1B peri-implantitis defects, forming six groups (n=10 per group) based on defect type and treatment protocol. Additionally, one positive and one negative control implant was used. Erythritol powder, PEEK ultrasonic tips, and titanium curettes were applied for 2 min in Class 1A defects and 3 minutes in Class 1B defects. Residual red ink areas were quantified with digital software, and implant surface changes were analyzed using SEM and EDS. None of the methods achieved complete decontamination. However, erythritol powder was significantly the most effective, leaving a residual ink rate of 24% ± 6% (p < 0.001). PEEK ultrasonic tips resulted in 41% ± 4% residual ink, while titanium curettes left 55% ± 3%. Significant differences were observed among all methods. No significant difference in decontamination efficacy was found between Class 1A and Class 1B defects. SEM analysis showed minimal surface damage with erythritol powder and PEEK tips, whereas titanium curettes caused moderate to severe damage. Based on both decontamination efficiency and surface preservation, erythritol powder and PEEK tips are safe and effective options for peri-implantitis treatment, while titanium curettes are less effective and cause considerable surface damage. These findings may assist clinicians in peri-implantitis treatment planning.
Subjects
MeSH terms (MEDLINE)
Substances
Authors and institutions
- Faculty of Dentistry, Department of Periodontology, Akdeniz University; ipekozgu@akdeniz.edu.tr.
- Faculty of Dentistry, Department of Periodontology, Akdeniz University.
Cite
APA
Ozgu, I., & Ustun, K. (2025). Effects of Mechanical Methods Used in Peri-implantitis Treatment on Implant Surface Decontamination and Roughness. Journal of Visualized Experiments. https://doi.org/10.3791/67778
Vancouver
Ozgu I, Ustun K. Effects of Mechanical Methods Used in Peri-implantitis Treatment on Implant Surface Decontamination and Roughness. Journal of Visualized Experiments. 2025. doi:10.3791/67778
BibTeX
@article{Ozgu2025,
author = {Ozgu, Ipek and Ustun, Kemal},
title = {Effects of Mechanical Methods Used in Peri-implantitis Treatment on Implant Surface Decontamination and Roughness},
journal = {Journal of Visualized Experiments},
year = {2025},
doi = {10.3791/67778}
}
EUVIMED