EUVIMEDEUVIMED felfedezése
Video/Audio

Real-Time Imaging of Bonding in 3D-Printed Layers

J Jesse Buijs, Raoul Fix, Hanne M van der Kooij, Thomas E Kodger

Journal of Visualized Experiments · 2023-09-01 · (199)

DOI: 10.3791/65415 ↗

At a glance

Video/Audio in Journal of Visualized Experiments, published online on 2023-09-01. Written by J Jesse Buijs and 3 co-authors. Institution: Physical Chemistry and Soft Matter, Wageningen University & Research; jesse.buijs@wur.nl. Major MEDLINE topics: Diagnostic Imaging, Cold Temperature. Cited 3 times so far (Crossref); 20 references.

AbsztraktSubjectsBibliográfiai adatokCiteRelated studies

Abstract (original language)

In recent times, 3D printing technology has revolutionized our ability to design and produce products, but optimizing the print quality can be challenging. The process of extrusion 3D printing involves pressuring molten material through a thin nozzle and depositing it onto previously extruded material. This method relies on bonding between the consecutive layers to create a strong and visually appealing final product. This is no easy task, as many parameters, such as the nozzle temperature, layer thickness, and printing speed, must be fine-tuned to achieve optimal results. In this study, a method for visualizing the polymer dynamics during extrusion is presented, giving insight into the layer bonding process. Using laser speckle imaging, the plastic flow and fusion can be resolved non-invasively, internally, and with high spatiotemporal resolution. This measurement, which is easy to perform, provides an in-depth understanding of the underlying mechanics influencing the final print quality. This methodology was tested with a range of cooling fan speeds, and the results showed increased polymer motion with lower fan speeds and, thus, explained the poor printing quality when the cooling fan was turned off. These findings show that this methodology allows for optimizing the printing settings and understanding the material behavior. This information can be used for the development and testing of novel printing materials or advanced slicing procedures. With this approach, a deeper understanding of extrusion can be built to take 3D printing to the next level.

Subjects

MeSH terms (MEDLINE)

Diagnostic ImagingCold TemperatureMotionPolymersPrinting, Three-Dimensional

Substances

Polymers

Authors and institutions

  • Physical Chemistry and Soft Matter, Wageningen University & Research; jesse.buijs@wur.nl.
  • Physical Chemistry and Soft Matter, Wageningen University & Research.

Cite

APA

Buijs, J. J., Fix, R., van der Kooij, H. M., & Kodger, T. E. (2023). Real-Time Imaging of Bonding in 3D-Printed Layers. Journal of Visualized Experiments. https://doi.org/10.3791/65415

Vancouver

Buijs JJ, Fix R, van der Kooij HM, Kodger TE. Real-Time Imaging of Bonding in 3D-Printed Layers. Journal of Visualized Experiments. 2023. doi:10.3791/65415

BibTeX
@article{Buijs2023,
  author = {Buijs, J Jesse and Fix, Raoul and van der Kooij, Hanne M and Kodger, Thomas E},
  title = {Real-Time Imaging of Bonding in 3D-Printed Layers},
  journal = {Journal of Visualized Experiments},
  year = {2023},
  number = {199},
  doi = {10.3791/65415}
}
Start for free →