EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 3D printed electronic wearable device to generate vertical, horizontal and phono-articulatory jaw movement parameters: A concept implementation

Taseef Hasan Farook iD, Saif Ahmed, Md Shoriful Islam Talukder, James Dudley iD

PLOS ONE · 2023

DOI: 10.1371/journal.pone.0290497 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2023. Verfasst von Taseef Hasan Farook und 3 weiteren Autor:innen. Beteiligte Einrichtung: Adelaide Dental School, University of Adelaide, Adelaide, SA, Australia. Hauptthemen laut MEDLINE: Movement, Wearable Electronic Devices. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The University of Adelaide Paul Lee Bequest, Early Grant Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The current research aimed to develop a concept open-source 3D printable, electronic wearable head gear to record jaw movement parameters. Materials & methods A 3D printed wearable device was designed and manufactured then fitted with open-source sensors to record vertical, horizontal and phono-articulatory jaw motions. Mean deviation and relative error were measured invitro. The device was implemented on two volunteers for the parameters of maximum anterior protrusion (MAP), maximum lateral excursion (MLE), normal (NMO), and maximum (MMO) mouth opening and fricative phono-articulation. Raw data was normalized using z-score and root mean squared error (RMSE) values were used to evaluate relative differences in readings across the two participants.

Results

RMSE differences across the left and right piezoresistive sensors demonstrated near similar bilateral movements during normal (0.12) and maximal mouth (0.09) opening for participant 1, while varying greatly for participant 2 (0.25 and 0.14, respectively). There were larger differences in RMSE during accelerometric motion in different axes for MAP, MLE and Fricatives.

Conclusion

The current implementation demonstrated that a 3D printed electronic wearable device with open-source sensor technology can record horizontal, vertical, and phono-articulatory maxillomandibular movements in two participants. However, future efforts must be made to overcome the limitations documented within the current experiment.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

MovementWearable Electronic DevicesHumansMotionElectronicsPrinting, Three-Dimensional

Autor:innen und Institutionen

  • Adelaide Dental School, University of Adelaide, Adelaide, SA, Australia.
  • Department of Electrical and Computer Engineering, North South University, Dhaka, Bangladesh.

ORCID-Profile: Taseef Hasan Farook, James Dudley

Förderung

  • The University of Adelaide Paul Lee Bequest
  • Early Grant Development

Zitieren

APA

Farook, T. H., Ahmed, S., Talukder, M. S. I., & Dudley, J. (2023). A 3D printed electronic wearable device to generate vertical, horizontal and phono-articulatory jaw movement parameters: A concept implementation. PLOS ONE. https://doi.org/10.1371/journal.pone.0290497

Vancouver

Farook TH, Ahmed S, Talukder MSI, Dudley J. A 3D printed electronic wearable device to generate vertical, horizontal and phono-articulatory jaw movement parameters: A concept implementation. PLOS ONE. 2023. doi:10.1371/journal.pone.0290497

BibTeX
@article{Farook2023,
  author = {Farook, Taseef Hasan and Ahmed, Saif and Talukder, Md Shoriful Islam and Dudley, James},
  title = {A 3D printed electronic wearable device to generate vertical, horizontal and phono-articulatory jaw movement parameters: A concept implementation},
  journal = {PLOS ONE},
  year = {2023},
  doi = {10.1371/journal.pone.0290497}
}
Kostenlos starten →